To NF7-S and overclock pros...I'm getting scrambled video bios screen after overclocking fsb to 190

[ferrarifreak93]

I have an athlon 1700+ T-bred B (JIUHB 0302MPM), abit nf7-s ver1.2 motherboard, and 1 stick of Kingston HyperX PC3000 memory. I set the bus to 188mhz, booted into windows, and prime95 ran fine. I then set the bus to 190 and I got the normal beep at post but got a scrambled video bios splash screen. Does this mean the memory can't handle the 190fsb (the ram is rated at 185)? I suppose it could be that I've hit a wall in my overclocking, however I don't think this is the case because I got the normal beep at POST (which means that the cpu overclock settings are fine). Any suggestions?

 

[Shimmishim]

what timings are you running on your ram?

 

[ChampionAtTufshop]

did you lock agp freq?

(although i dunno if it does anything, my 9700pro works just fine at 200fsb and keeping agp freq to "auto" on a7n8x dlx )

 

[przero]

What card/drivers? The HyperX doesn't like the Cat3.2 from ATI.

 

[ferrarifreak93]

Shimmishim: running 2,2,2,6 timings - could overextending the memory make the bios splash screen scrambled?

ChampionAtTufshop: AGP lock at 66mhz

przero: Aopen GeForce2 Ti 64mb ddr

 

[Shimmishim]

try relaxing the timings to 2-3-3-6 and see if that fixes it...

 

[bgeh]

try relaxing the mem timings and try increasing the chipset voltage