Question Time for an upgrade

[ISAslot]

My current build is becoming unstable. It's from 2013. I'm hoping to use as many parts as I can. Here's my list so far:

https://pcpartpicker.com/list/bsgQFs

I based it off of computer thestrangbrew1 built: https://forums.anandtech.com/threads/question-about-builds-in-general-for-proposed-use.2621254
Will my EVGA supernova 850 GS power supply work with the new parts?
I plan on using my same early 2000s customized ATX Enlight case.

 

[In2Photos]

Yes, your PSU should still work. You might be able to add it to your PC Part Picker list and it will tell you which cables you'll need. Should be 24 pin, 8 pin EPS, 1 8 pin and 1 6 pin PCIe.

I don't see any glaring issues with your list.

 

[ISAslot]

Thanks In2Photos, I've added the existing psu.

 

[Brainonska511]

The build seems fine overall.

Do you live near a Micro Center? They sometimes have some good value bundles.

 

[ISAslot]

Thanks Brainonska
I wish, but alas the closest one is very far

 

[manly]

Newegg once in a while has good bundles. I'd target Black Friday deals unless a slick bundle drops sooner.

I'm all for reuse, but a 21 year old PC case is kinda pushing things?

 

[ISAslot]

The case isn't even the oldest component. The keyboard is an IBM AT type F and one fan is a Panflo 120mm from 1985.

 

[manly]

It's not the absolute age, but whether that case is good enough to use for another decade? I mean as far as design (front I/O) and cable management. If you're happy with it, that's fine.
Nothing wrong with a classic IBM keyboard; am curious how much a 120mm fan cost in 1985 dollars.

 

[Brainonska511]

It's not the absolute age, but whether that case is good enough to use for another decade? I mean as far as design (front I/O) and cable management. If you're happy with it, that's fine.
Nothing wrong with a classic IBM keyboard; am curious how much a 120mm fan cost in 1985 dollars.

I feel like there have also been improvements in internal organization and airflow arrangements for cooling. (Of course, some of that comes at the expense of 3.5" and 5.25" drive bays).

 

[lakedude]

Do you know what is causing the instability? I wouldn't reuse parts unless you are sure they are good...

 

[ISAslot]

Do you know what is causing the instability? I wouldn't reuse parts unless you are sure they are good...

Fair point. Build is complete and stable so I it appears it was a replaced component.

 

[ISAslot]

Upgrade completed. Much faster! Here's a pic. I ended up adding a new 120mm to the top. The old panflo had no PWM and the bearings are too noisy now.