Thermaltake VA3000

[eVaoVe]

Hey guys, If I wanted to install new case fans, how would I go about doing so? The casing or housing for where you put the Hard drive is blocking the way. Is there an easier way? I already have my computer set up and everything, woudl I have to remove it?

Thanks in advance

 

[CalvinHobbes]

The side fan (if you have one) is easy as is the rear fan. The front fan is behind the drive cage but I thought you could get to it from the front. I'd have to check tonight when I get home.

Here's some pix. http://www.thermaltake.com/xaserCase/tsunami/bwa/bwa.htm
From the photos it looks like you have to remove the HD cage and then you can get to the fan.

 

[Gronk]

eVaoVe,

Theres a spring loaded screw, At the bottom of the HD cage, remove this first (careful, don't lose the tiny spring!) and gently pull out the cage.. I say gently because the Tsunami's thin aluminum flexs/bends easily...

Then you need to remove the front bezel to access the front fan screws.. You do this by opening the bezel all the way, then lift it off it's hinges... careful, theres a wire lead attached for the bezel LEDs..