Thermalright Heatsinks on Sale!!

Toggle sidebar Toggle sidebar
G

gonzo2k

Platinum Member
Jun 12, 2001
2,433
0
0
webpitstop.com
Decent looking site, nice reseller ratings and certainly competetive pricing. How's the shipping rates?
Love that AX-7 for $15.00. I'm an SVC guy until I hear more!
 
L

Lizardman

Golden Member
Jul 23, 2001
1,990
0
0
Originally posted by: gonzo2k
Decent looking site, nice reseller ratings and certainly competetive pricing. How's the shipping rates?
Love that AX-7 for $15.00. I'm an SVC guy until I hear more!
Click to expand...

I have ordered from both svc and case-mod. Both places are great. Case mod has real shipping just like svc so dont worry about that. If you need a heatsink give them a try.
 
P

Phunktion

Platinum Member
Jan 29, 2001
2,502
0
0
Originally posted by: stevens
How much better is the slk800 than the sk7? They seem very similar to me.
Click to expand...

I've used these for building several computers in fact they are all I use lately (either the 800 or the 7)
In my experience with the two the 800 is a little better than the SK-7 but if you're using a low CFM fan you will get roughly the same performance out of the two so the $10 difference isn't really justified if you go that route.. if you're going to use a tornado do yourself a favor and get the 800..

Either of the two have certain oddities in their install that could cause problems for those who don't double check their install:

The 800 it won't sit as easily on the CPU because it's actually more narrow than the CPU itself (which was scary at first but not so bad as it comes with new pads you can stick on in the place of the ones already on AMD CPU's that become useless with the 800) install it carefully and with the motherboard (or tray if you have that option) out of the case itself to make it easier to see what your doing..

The Sk-7 has it's own problem with being a little too big on the CPU socket (it's very close between it and the socket hump when seated) so just make sure when you install it to keep the clip as close to the back of the heatsink as you can when attaching the back of the clip or it will attach to the socket at an angle (NOT GOOD) and you might fry your processor if you power it up without reseating the heatsink properly first..
 
BentValve

BentValve

Diamond Member
Dec 26, 2001
4,190
0
0
All of my heatsink money will be going to SVC, they have treated me far too good to start spreading my money
to other dealers. If you like SVC then keep your money there ...they need it.
 
L

Lark888

Golden Member
Oct 10, 1999
1,032
0
71
Thanks for the post. I stopped shopping at SVC and had been looking for a reliable source for heatsinks. :)

Oh, and BTW these prices are $5.00 cheaper at Case-Mod at the moment. (SVC is $34.99 for the 800)
 
M

manicm

Junior Member
Dec 5, 2000
15
0
0
Originally posted by: MrCodeDude
Case-Mod.com is a good reseller, but SVC has had these prices for a while now.
-- mrcodedude
Click to expand...

Last time I checked, SVC's prices are higher except on the SK-7 model which is equal... see here.

Another reason I favored Case-Mod is due to SVC's payment policy when shipping to an alternate address. It states:

"Note: If your billing and shipping addresses do not match:

1. The shipping address must be filed with the credit card company.
2. The credit card company's telephone number must be entered on the order form.

If these two conditions are not met, your order will be placed on hold and will be delayed indefinitely."

Some of us don't happen to have our school addresses listed with our credit card companies so this deterred me from ordering from them. (I'm not lazy, it's just a pain in the butt to go through this w/ my issuer.)

-manicm
 
P

Parasitic

Diamond Member
Aug 17, 2002
4,000
2
0
About shipping to different addresses on SVC orders, I think it's a good thing...improves security. If you're fussed about it, you might as well write a little note in the comment box, and call them immediately to authorize the charge yourself to avoid the hold.

With that said, SVC treats me well; I buy 95% of the cooling stuff from SVC, and the other 5% from bestbyte.net. Although that AX7 for $15 is really attractive though, maybe I should stock up on that :)
 
H

hollowman

Diamond Member
Feb 19, 2001
4,864
0
76
Originally posted by: BentValve
All of my heatsink money will be going to SVC, they have treated me far too good to start spreading my money
to other dealers.
Click to expand...

 
S

stevejst

Banned
May 12, 2002
1,018
0
0
Thermalright? guess they're trying to leech off the "Thermaltake" brand name. hehe
Click to expand...

? I doubt that. The thermal solutions by Thermalright are at least a notch above Thermaltake. That would be like BMW stealing a name from GMC.:D

The shipping rates for these guys are higher than SVC thus this deal is not worth signing up there since svc has more or less the same prices with less shipping ripoff.
 
H

huesmann

Diamond Member
Dec 7, 1999
8,618
0
76
Is there a relatively recent comparison of various HSF combos with data on cooling power vs. noise for all the HSFs?
 
H

huesmann

Diamond Member
Dec 7, 1999
8,618
0
76
Originally posted by: manicm
Some of us don't happen to have our school addresses listed with our credit card companies so this deterred me from ordering from them. (I'm not lazy, it's just a pain in the butt to go through this w/ my issuer.)
Click to expand...
It's a PITB to make a phone call???
 
D

DeadMilkman

Member
Mar 27, 2003
133
0
0
Please wait for the next available representative.....

(*insert elevator music)

15, 20, 30mins later when your drunkenly dancing with the music

"Yeah I'm Brad, what do you want!"

 
E

Exon

Member
Sep 26, 2001
47
0
0
I'm a big fan of Case-Mod. They've treated me well, and done right by me and my money.

My only complaint would be with Airborne Express, their tracking is slow to update. Seems it's a day behind or so.

Edit:
Oh, and the thermalright heatsinks are far better than the thermaltekes. I've only put thermalright heatsinks on my processors anymore. Currently I've got the sk-8 and it cools my amd1700+ to 47C. OCed to 2.08ghz and at full load.
 
G

gonzo2k

Platinum Member
Jun 12, 2001
2,433
0
0
webpitstop.com
Thanks for the response re: shipping, lizardman. I'll put 'em in my TechShop favs.

As to Thermaltake vs. Thermalright... take my advice and make the right choice- Thermalright takes it!
No contest!
 
F

fatbaby

Banned
May 7, 2001
6,427
1
0
as an FYI, casemod.com is owned by at member jokerf15. I've done business with casemod.com before and i'm satisfied overall.
 
I

imaklone

Member
Jan 26, 2003
44
0
0
The Sk-7 has it's own problem with being a little too big on the CPU socket (it's very close between it and the socket hump when seated) so just make sure when you install it to keep the clip as close to the back of the heatsink as you can when attaching the back of the clip or it will attach to the socket at an angle (NOT GOOD) and you might fry your processor if you power it up without reseating the heatsink properly first..
Click to expand...

Completely agreed, as I have burned up a cpu because of this. In fact i had not even thought of checking since my previous heatsink (Volcano 6Cu) was an automatic nice fit. The sk-7 thus challenged my ignorance. The the sk-7 is very nice indeed.
 
E

elkinm

Platinum Member
Jun 9, 2001
2,146
0
71
Would you say that these prices are worth the improvement over the SK6+ from SVC with a average speed 60 mm fan or are the AX-7 SK7 worth one and a half to double the price?

And at what amount of airflow is thre no real improvement over the AX7?

Thanks
 
P

pelikan

Diamond Member
Dec 28, 2002
3,118
0
76
Just a note about SVC. I RMA'd a TT SmartFan2 that stopped working after four months. I told them I didn't want a replacement. So they sent me a check for my purchase price and shipping costs.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom