Hey all -
I've been trying to solve a weird problem with a new T-bird
system I'm building (trying to build).
Here's what I've got:
AMD 1200 T-bird
Asus A7V and(!) Abit KT7-Raid
CoolerMaster DP5-6H11
2x 256MB Corsair DIMM's (CAS2)
3dLabs GVX1 (AGP model)
IBM 45GB 75GXP ATA100 HD
Toshiba CD-RW/DVD
Palo Alto Products PA-810 enclosure with a 300W Delta Electronics DPS-300bb ATX Power Supply
So here's what's going on. Put the whole thing together (no big deal) and started it up. System stayed on for a few minutes than powered off. Checked it over, turned it on again. Same thing - on for a couple of minutes, then down. It's not going into standby, it's literally turning itself OFF. HARD.
At first, I thought it might be a thermal problem, so I checked the temperatures in the A7V BIOS (version 1005c), but the CPU was never over 45 C and the m/b never got to hot either. Still, to make sure, I dumped the adhesive, thermal stuff that came with the CoolerMaster and got some better paste, stuck in there. Same thing.
So then I became suspicious of the M/B. Went to Fry's (DOH!) to find another A7V, but they didn't have it, so I picked up the Abit KT7-Raid. Stuck that in there, wired it up. A few minutes and BAM! Off it goes again.
So now I'm starting to wonder about the ATX power supply. It's supposed to be a pretty good one, but ... who knows.
Any help on this would be very much appreciated. I'm at wits end.
Thanks, and sorry for the long post.
I've been trying to solve a weird problem with a new T-bird
system I'm building (trying to build).
Here's what I've got:
AMD 1200 T-bird
Asus A7V and(!) Abit KT7-Raid
CoolerMaster DP5-6H11
2x 256MB Corsair DIMM's (CAS2)
3dLabs GVX1 (AGP model)
IBM 45GB 75GXP ATA100 HD
Toshiba CD-RW/DVD
Palo Alto Products PA-810 enclosure with a 300W Delta Electronics DPS-300bb ATX Power Supply
So here's what's going on. Put the whole thing together (no big deal) and started it up. System stayed on for a few minutes than powered off. Checked it over, turned it on again. Same thing - on for a couple of minutes, then down. It's not going into standby, it's literally turning itself OFF. HARD.
At first, I thought it might be a thermal problem, so I checked the temperatures in the A7V BIOS (version 1005c), but the CPU was never over 45 C and the m/b never got to hot either. Still, to make sure, I dumped the adhesive, thermal stuff that came with the CoolerMaster and got some better paste, stuck in there. Same thing.
So then I became suspicious of the M/B. Went to Fry's (DOH!) to find another A7V, but they didn't have it, so I picked up the Abit KT7-Raid. Stuck that in there, wired it up. A few minutes and BAM! Off it goes again.
So now I'm starting to wonder about the ATX power supply. It's supposed to be a pretty good one, but ... who knows.
Any help on this would be very much appreciated. I'm at wits end.
Thanks, and sorry for the long post.