The Golden Bridges, need all the info..

[gogeeta13]

ok, I want to step a duron 700 up to a 9x multiplier, and an 800 up to 9 as well. I need to know which bridges correspond to what. The voltage one would be great too.

I know there is an article somewhere, but I can't find it

 

[SaturnX]

Here's all the settings to set a single specific multiplier onto the CPU:
http://www.anandtech.com/guides/showdoc.html?i=1440&p=6

Otherwise, simply unlock the CPU but connecting all the L1 bridges, which will allow you to adjust them as needed.

Connecting all the L7 bridges will set the voltage at 1.85, while the standard for durons is 1.5.

All the info above works for Athlons, I don't work with Durons, so not sure if the same, but should be.

--Mark

 

[gogeeta13]

Alright, I found the article after I posted. I am using these durons on a mobo with a null bios, so all my settings need to be on chip. Thanks!

 

[TunaBoo]

<<
Connecting all the L7 bridges will set the voltage at 1.85, while the standard for durons is 1.5.

--Mark >>



You sure durons dont run at 1.75 volts? *scratches head*

 

[Budman]

Some Durons run at 1.5 others run at 1.60.

 

[TunaBoo]

I have been around PC-PSUs for too long. for a while I thought athlons were supposed to run at 1.7 volts. Whoops.

You are probably right about the 1.5 or 1.6 thing. Maybe I was thinking of old skool durons.