The fastest of the Fastest! Who here has the Highest Overclocks?

[howesey]

<< TI-85@10Mhz >>

Hehe, my mum has OCed her TI 85!




<< Daovonnaex, you just bar none the fastest rig on Anandtech.

BTW where in the hell do you find a 350 Watt peltier? >>

You can get them at Maplins, they have them for industrial use.


My computer is at a sad 800@912 :disgust:

I can get someone to show you a PIV2200 @ 3.1GHz with a 3dmark score of 13000!

 

[christoph83]

Ive got a 2ghz northwood at 2.54ghz at 127FSB voltage is at 1.65v. Memory is running at 166FSB accoring to Sandra. Go check out the cpu and overclocking forums under the 1.6A northwoods. Those are doing 800mhz overclocks almost garunteed.

 

[Daovonnaex]

I'm not the fastest according to SysOpt. The Finns with the 3,675 MHz P4 put their system up there...
At least my Athlon system is faster than any at SysOpt.

 

[Adul]

sounds like it is time for some extreme cooling of that p4.

 

[Daovonnaex]

<< sounds like it is time for some extreme cooling of that p4. >>

I don't really need or want another peltier...so you'll have to wait until I get the dilution engine working.

 

[dbwillis]

P4 1.6a at 2304mhz -stable (144x16) stock cooling and 1.55v
2400 (150x16) runs OK but SiSoft Sandra closes to desktop (also 1.55v and stock cooling)

 

[DAICA]

It seems a little bit silly to overclock your cpus these days. The price gap between the high end and mid processors are so miniscule.
I just feel that we dont really achieve as much as we used to in the good 'ole days.

 

[Daovonnaex]

<< P4 1.6a at 2304mhz -stable (144x16) stock cooling and 1.55v
2400 (150x16) runs OK but SiSoft Sandra closes to desktop (also 1.55v and stock cooling) >>

You may want to up your voltage a bit more.

 

[Jen]

my system
1333 mhz bird at 1600mhz.........10 x 160 [2 volts]
h20 cooling..........summers here get hot
epox 8k7a ddr board
pc2400 corsair memory.......
radeon vivo 64mb

room mates

600e at 864 mhz.[CA2 stepping]........ 6 x 144 did have it at 930 mhz with peltier........this was my processor bought new 2 yrs ago.
asus cusl2
pep66 heatsink..........modified
pc133 mosel memory
asus geforce 1

recent computer i built for a friend was
1.53 xp at 1725 mhz.......1.8 volts .......11.5 x 150
alpha 8045 heatsink.........with sunon fan
abit kg7 motherboard
pc2400 nanya ddr memory
hercules prophet geforce 1

i have a 1800+ xp waiting for me to use...........its been sitting here for a month now

Jen

 

[HouRman]

Pentium3 600E @ 900mhz (150 X 6.0 ) @ 1.7V
SL43E Malay

STOCK cooling w/thermal compound
Asus P3V4X
Windows 98SE
256megs mushkin PC133 ( costed $140 for each 128meg stick at that time)
Barricuda IV 40gig @ 7200
CL Geforce DDR Annihilator Pro (120/300 @ 155/345) Cooled by Golden Orb with fan taken out

Pioneer 106S
Cornerstone P1460 19" CRT
ACS56 speakers
Sennheiser EH2200 headphones
Sound Blaster PCI512 sound card
Intellimouse on Everglide Giganta

Antec KS-282 painted Black laquer w/ clear coat
120mm Soyo intake fan controlled by external rotary rheostat
Dynamat Extreme on each inside panel

I'd like to see anybody with a Pentium3 or better be able to overclock more than 50% with stock cooling. hehe

I did have a crude water cooling rig that I decided not to use. (this was over 2 years ago when they didn't have such nice peltiers and water blocks). Oh, forgot to mention I don't run at 900, I run at 864 to be on the safe side now.

 

[Jen]

<< I'd like to see anybody with a Pentium3 or better be able to overclock more than 50% with stock cooling. hehe >>




my pentium 550e did 852 with stock cooling..............it was a good chip cost me 325 dollars back when it was new.........



Jen

 

[CStroman]

I've had my Duron 750 as high as 1136. Currently I run it at 1050, with 1.7 volts, but I could run it 1.5 if I wanted to. I accidentally had it on 1.5 for about a month before I noticed it.

 

[Pabster]

P4 Northwood 1.6A @ 2240 (140x16) on P4B266-C
P4 Northwood 1.6A @ 2400 (150x16) on P4S333

Both at 1.6v and rock solid. Not too bad, if I say so myself

 

[Bovinicus]

My 1GHz TBird-C is running at 1335MHz (157x8.5) at the default voltage. I would push it higher but my video card starts displaying artifacts during DVD playback when I push the FSB any higher. =(

 

[pillage2001]

1.4Ghz at 1.6Ghz now.

Tbird.

 

[Jeff7]

I bet no one here ever got a Cyrix M2 300 up to 400!
33% overclock there. Well, sort of.

My GF2 Ti runs default 250/400. It overclocks to at least 285/515. As far as processors go, my 750 T-bird is doing 866.

 

[Daovonnaex]

<< P4 Northwood 1.6A @ 2240 (140x16) on P4B266-C
P4 Northwood 1.6A @ 2400 (150x16) on P4S333

Both at 1.6v and rock solid. Not too bad, if I say so myself >>

You've already tried two DDR SDRAM platforms, now you should try RDRAM.

Has anyone tried overclocking with the ALi ALADDiN? Seriously.

 

[Adul]

I would be interested if any has either.

 

[Daovonnaex]

<< I would be interested if any has either. >>

More interesting would be if someone picked up a VIA P4XB and overclocked it, since that's actually a good overclocking platform and performs very well to begin with. If RDRAM weren't available on the P4, rest assured, I would've overclocked a P4XB.

 

[HouRman]

<< my pentium 550e did 852 with stock cooling..............it was a good chip cost me 325 dollars back when it was new......... >>


Mine costed me $319.00 more than 2 years ago at a local store. I pretty much get most of my stuff at Fry's nowadays. Did u know they have Arctic Silver, Mushkin ram, and a good return policy. (returned a burner I was unhappy with after 35 days for full refund)

That's pretty good, didn't hear too much about the 550Es. The 600E seemed to be the pick for me though as is the 1.6A is now.
I still have the package my OEM 600e was purchased in. It was at Fry's electronics.

Pentium III-600/100mhz
(256K)Cache 1 YR warranty 1|342
Secc2 Bare
80526PY600256 Secc2 2688312

 

[Daovonnaex]

<<

<< my pentium 550e did 852 with stock cooling..............it was a good chip cost me 325 dollars back when it was new......... >>


That's pretty good, didn't hear too much about the 550Es. The 600E seemed to be the pick for me though as is the 1.6A is now.
I still have the package my OEM 600e was purchased in. It was at Fry's electronics.

Pentium III-600/100mhz
(256K)Cache 1 YR warranty 1|342
Secc2 Bare
80526PY600256 Secc2 2688312 >>

Any components for your 1.6A system yet? Speaking of which, I have a 1.6A system as well. Here's my 1.6A

Pentium 4 1600A @ 2400MHz
-Asus P4T-EM (it's mATX)
-2x 512mb Samsung PC800 RIMMs
-ACV Sunflower
-ATi Radeon 8500
-150MHz FSB and 1.7v

 

[Adul]

Daovo, Just how many freaking systems do you have??

 

[x86]

<< You've already tried two DDR SDRAM platforms, now you should try RDRAM.

Has anyone tried overclocking with the ALi ALADDiN? Seriously. >>



Who the heck would want to use an ALi with all of those compatability and stability problems?

-x86

 

[x86]

<< Daovo, Just how many freaking systems do you have?? >>



He must be Bill Gates in disguise.

-x86

 

[CTho9305]

pentium 75@120. can't get into windows yet. I think i'll try the 170 watt peltier and report back