Telnet to Alhpa server through D-link DI-624

[fitz1979]

Hi,

I'm having a problem Telnetting to my Alpha on port 23 server from an external source. My configuration is as follows.

I have a Broadband connection through a Netopia modem, which is set up in bridge mode.
I then have this connection going into the WAN port of my D-link.

My D-link is set to an internal IP of 192.168.0.250
My alpha is set to an internal IP of 192.168.0.200
I have a Dell with an internal IP of 192.168.0.201

I can Telnet to the alpha from my Dell on the internal network no problem. But when I try and telnet to it using my external IP it won't connect. I have Telnet set up on the D-Link's virtual server. Both machines are in the DHCP range. I have double checked the firewall and made sure both port 23&24 are open and I have disabled all IP/MAC filters on the D-link.

I put a http server on the Dell and can connect to it from the external address when I have set it up on the D-Link's Virtual server.

I was wondering has anybody come across this before?

 

[imported_SeanRinVA]

You're going to have to set up Port forwarding. The router doesn't know where to put the connection request...

Set up the router w/ Port Forwarding of Port 23 to 192.168.0.200. You should be able to connect from outside the LAN.