Team Group TLRED416G3200HC16CDC01 Problems

[B-Riz]

I bought this https://www.newegg.com/Product/Product.aspx?Item=N82E16820331066 on sale as an upgrade to the R3 2200G / Asus B350-F setup and I am pretty sure they do not work well together.

I have other systems to test it in, but, at even stock default settings right now, upon Windows reboot (after a fresh install) the system crashes and I have to re-install Windows.

I have not had time to put the old slow 2 x 4GB 2400 back in and try to boot the fresh Windows install, that is next.

 

[Hans Gruber]

Make sure your motherboard bios is updated. I have Team Dark Pro memory in my Ryzen build. Works very well @ 3200mhz on a B350 MSI Carbon Gaming Pro motherboard.

 

[B-Riz]

Make sure your motherboard bios is updated. I have Team Dark Pro memory in my Ryzen build. Works very well @ 3200mhz on a B350 MSI Carbon Gaming Pro motherboard.

It us updated at the newest 1.0.0.6 AGESA.

I am running some Team T-Force DARK 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model TDRED432G3200HC16CDC01 in the R7-2700X system with Stilt timings at 3066 no issues.

https://www.newegg.com/Product/Product.aspx?Item=N82E16820331062

So this is kinda frustrating, but, once I figure out what the issue is, will give an update.

 

[Hans Gruber]

Try one stick at a time. Run it through the XMP settings 1st. Let it run for a few hours to a day or two. You may want to pull the bios battery as well to hard reset the motherboard.

 

[B-Riz]

Here's one for the "what the heck never seen that before?" issues.

It was the HDMI cable I had connected. It worked for the initial install of Win 10 1809, but after drivers were loaded (and rebooted), it stopped getting a video signal to the monitor.

So I hooked up a new 4K HDMI cable and good to go.

The board loaded XMP profile, but was unstable at 1.35. It is now set at 1.4 and going through stress testing. If it passes, then, time to try tightening the timings.

I have not run Taiphoon on it yet to see what it actually is.

 

[B-Riz]

I have returned this memory.

It needs over 1.35 volts to be stable on R3 2200G / B350-F system.

It can do 16-16-16-16-32 @ 2933 1.39, but, that gets the same performance as loading the XMP profile and setting voltage at 1.39.

Anything lower on timings was a no post.

It is probably meant for an Intel system.

 

[Hans Gruber]

I have returned this memory.

It needs over 1.35 volts to be stable on R3 2200G / B350-F system.

It can do 16-16-16-16-32 @ 2933 1.39, but, that gets the same performance as loading the XMP profile and setting voltage at 1.39.

Anything lower on timings was a no post.

It is probably meant for an Intel system.

My guess is that your motherboard bios is not very good for memory. When I first got my B350 Carbon gaming pro motherboard. The ram Oc'd for ****. After a few bios updates it runs anything and everything no problem.