Tankless water heaters
                               They're efficient but not necessarily economical
                                                                         VIDEO:
                                     Tankless water heaters
All videos 
                                  Heating  water accounts for up to 30 percent of the average home's energy  budget. Some makers of gas-fired tankless water heaters                                     claim their products can cut your  energy costs up to half over regular storage heaters. So is it time to  switch?
Probably not. Gas tankless water heaters, which use  high-powered burners to quickly heat water as it runs through a heat  exchanger,                                     were 22 percent more energy  efficient on average than the gas-fired storage-tank models in our  tests. That translates into                                     a savings of around $70 to $80 per  year, based on 2008 national energy costs. But because they cost much  more than storage                                     water heaters, it can take up to 22  years to break even—longer than the 20-year life of many models.  Moreover, our online                                     poll of 1,200 readers revealed wide  variations in installation costs, energy savings, and satisfaction.
With  the help of an outside lab, we pitted Takagi and Noritz gas-fired  tankless water heaters against three storage water                                     heaters. We didn't test electric  tankless heaters because many can't deliver hot water fast enough to  replace a conventional                                     water heater if ground­water is  cold. Even in areas with warm groundwater, most homeowners would need to  upgrade their electrical                                     service to power a whole-house  tankless model.
Our tests simulated daily use of 76 to 78 gallons  of hot water. That's the equivalent of taking three showers, washing  one                                     laun­dry load, running the  dishwasher once (six cycles), and turning on the faucet nine times, for a  total of 19 draws. While                                     that's considered heavy use compared  with the standard Department of Energy test, we think it more  accurately represents an                                     average family's habits. We also ran  more than 45,000 gallons of very hard water through a tanked model and a  Rinnai tankless                                     model to simulate about 11 years of  regular use.
Here's what else we found:
Water runs hot and cold
Manufacturers  of tankless water heaters are fond of touting their products' ability  to provide an endless amount of hot water.                                     But inconsistent water temperatures  were a common complaint among our poll respondents. When you turn on the  faucet, tankless                                     models feed in some cold water to  gauge how big a temperature rise is needed. If there's cool water  lingering in your pipes,                                     you'll receive a momentary  "cold-water sandwich" between the old and new hot water. And a tankless  water heater's burner might                                     not ignite when you try to get just a  trickle of hot water for, say, shaving.
Nor do tankless water  heaters deliver hot water instantaneously. It takes time to heat the  water to the target temperature,                                     and just like storage water heaters,  any cold water in the pipes needs to be pushed out. And tankless  models' electric controls                                     mean you'll also lose hot water  during a power outage.
Up-front costs are high
The  tankless water heaters we tested cost $800 to $1,150, compared with  $300 to $480 for the regular storage-tank types. Tankless                                     models need electrical outlets for  their fan and electronics, upgraded gas pipes, and a new ventilation  system. That can bring                                     average installation costs to  $1,200, compared with $300 for storage-tank models.
Tankless units might need more care
During  our long-term testing, an indicator on the tankless model warned of  scale buildup. We paid $334 for special valves                                     and a plumber to flush out the water  heater with vinegar. Many industry pros recommend that tankless models  be serviced once                                     a year by a qualified technician.  Calcium buildup can decrease efficiency, restrict water flow, and damage  tankless models.                                     Experts suggest installing a water  softener if your water hardness is above 11 grains per gallon. Ignoring  this advice can                                     shorten your warranty.
Efficient storage models are pricey
We  also tested the $1,400 Vertex, a high-efficiency storage water heater  by A.O. Smith. The manufacturer claims its installation                                     costs are similar to a regular  storage model. But its high cost offsets much of the roughly $70 per  year the Vertex will save                                     you. Instead, we recommend buying a  conventional storage water heater with a 9- or 12-year warranty. In  previous tests, we                                     found that those models generally  had thicker insulation, bigger burners or larger heating elements, and  better corrosion-fighting                                     metal rods called anodes.