Swapping a Logic Board

[Warpirate]

My Drive

ST3320620AS
P/N 9BJ14G-305
Firmware: 3.AAE
Date code: 07131
Site Code:AMK

I have found another drive that has the following info on the label.

ST3320620AS
P/N 9BJ14G-305
Firmware: 3.AAE
Date code: 07111
Site Code:WU


From what I know about swapping these logic boards the drive I found should work on mine.

Can any one verify that this is correct? Or share their experience.

 

[RebateMonger]

Maybe this link will help.

I've been using a LOT of Seagate drives the past couple of years (especially a lot of 7200.10s). I hope this isn't a bad sign. :frown: I've seen a lot of bad Seagates in the past year. But no 7200.10s yet.....

 

[Zepper]

Looks like the same drive with the same firmware rev. built only 3 weeks apart - probably as close as you'll find w/o help from Seagate itself. Good luck!

.bh.

 

[Warpirate]

Originally posted by: RebateMonger
Maybe this link will help.

I've been using a LOT of Seagate drives the past couple of years (especially a lot of 7200.10s). I hope this isn't a bad sign. :frown: I've seen a lot of bad Seagates in the past year. But no 7200.10s yet.....

This hard drive is relatively new really only has about 150 hours of usage on a brand new build.