Structural engineers?

[JinLien]

Originally posted by: exodus454

Originally posted by: alphatarget1

Originally posted by: JinLien

There is one parition wall right in the center of the joist span, which is pretty heavy duty but it doesnt go all the way to the basement. I'm sure that could help with any flexing if it were to occur.

The wall isn't a load bearing wall but it could be use to tie the walls together and spread the weight making the ballon frame stronger. (honey comb/strut effect)

It doesn't go all the way to basement? So the wall is being supported by floor joists below or something?

It'd be nice to see floor plans!

Yes, its being supported by the floor joists on the first floor, and then there's another partition wall underneath that in the basement.

I cant today, but tomorrow I can go get the floor plans from the town if needed.

If the wall in the basement is directly underneath wall on the main floor then your basement wall could be a weight bearing wall (it look like the original engineer/architect that built/passed your house has it well under control).

I wouldn't worry too much about it unless you have rot/termites/rats/ants, or decided to have a hot tub/swiming pool in your room.

 

[JDrake]

Originally posted by: jagec
Why do all that fancy calculating? 600 lbs really isn't all *that* much...just get two fat guys to stand on the board. If it holds, you're golden, if they fall through, videotape it and post it on youtube.

signed :laugh: yes

 

[sygyzy]

This is the best thread all day especially with the structural engineer chiming in. The OP even has some cool knowledge like all the measurements and grain on the wood beams. Thanks!