Stressed Out with Hardware :|

[Sean Maxwell]

I ordered an A8N32-SLI Deluxe. It's a great board, but it won't overclock for me . It crashes out at 2.2ghz+. My older a8n-sli deluxe was at 2.72ghz without flaw. Using same processor. Anybody know whats going on?

Somebody please help me with my overclocking issue? I don't know why it won't go further. These boards are supposed to be rock solid on this. Please help!

 

[Gagan]

did you flash the new 1103 bios to the stock 1009? IT supposedly allows better FSB OC's

 

[Sean Maxwell]

No, I will try that. Thanks.

 

[Sean Maxwell]

Can I get anymore suggestions please, I'd REALLY appreciate it at this moment of stress.

 

[Sean Maxwell]

bump

 

[Sean Maxwell]

bump

 

[imported_red5]

Originally posted by: Sean Maxwell
bump

Did you flash your BIOS yet? I've heard a hundred times you have to use 1103 (or later) to OC... Do that, and then bump.

 

[MrUniq]

moment of stress ?

 

[Sean Maxwell]

Hey I have the machine at 2.72 on the latest BIOS...only limitation is my memory dividers will only boot at 100, 133, 200... for some reason 166, and 183 wont work

 

[CVSiN]

i tried one of these boards yesterday as well.. wasnt that impressed.. seems that for that extra X16 slot you give up alot.

regular PCI slot as well as 3 SATA ports.. crappy layout as well.

i went ahead and replaced my A8N-SLI Deluxe again and put my heatpipe back on it..

 

[Crescent13]

Don't worry, I know what your problem is (I think). I have the same mobo. You have to manually set the latency of the RAM to 3-3-3-8, because with PC4000 ram, it gets all messed up and thinks the latency is like 2-3-2-8 or something. But also remember, THE LATENCY SETTINGS IN THE BIOS ARE NOT IN THE USUAL ORDER!!. For my ram @ 3-4-3-8 PC4000 , I had to set the latency to 3-8-3-4 or something (not 100% sure). Just find out what each ram number is (TCRP, CAS, etc...), and then set that setting in the bios to that number. You should be fine after that.