- Oct 11, 1999
- 1,082
- 0
- 0
Looking for clues as to why this would happen. I?ve been running a PIII 550e at 760 with stock HS/Fan on an MSI6309 MB for the last 4 months @ default voltage without a problem. Temp never got above 100 F. under a full load . I had to order some fans for another box I just put together so I decided to replace the stock HS/Fan with a Gorb. Now I have to up the volts to 1.7 on this thing or it will lockup after 2-3 hours. The CPU reports a temp decrease of 10-15 degrees, (runs about 85 F under load) with the Gorb. MBM shows a temp decrease 1-2 min. before it locks.
It?s not a big deal I?m just curious as to why I have to up the volts to make it stable even though it?s running considerably cooler. The Gorb is the only part added but I did have to move one of the sticks of ram to the 3rd slot because of the tight clearance between the Gorb and the 1st Dimm slot on this MB
It?s not a big deal I?m just curious as to why I have to up the volts to make it stable even though it?s running considerably cooler. The Gorb is the only part added but I did have to move one of the sticks of ram to the 3rd slot because of the tight clearance between the Gorb and the 1st Dimm slot on this MB