• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Stop APU from using turbo core?

Techhog

Platinum Member
A friend of mine is having an issue with the APU in her laptop. It's overheating badly (to the point that I honestly doubt the the readings are accurate since they go all the way up to 112C without shutting down), so until she can get a cooler we're looking for a way to get her temps down a bit. We think that disabling turbo will help a bit. I suppose that undervolting would hepl more, but I'd rather not risk that. Can it be done in Overdrive?
 
I think you have a problem with the temperature readings perhaps. The laptop should throttle well before 112 deg C. Does it feel really hot to the touch?

If it is really getting that hot, I seriously doubt that one of the laptop cooling pads is going to make much difference.
 
I think you have a problem with the temperature readings perhaps. The laptop should throttle well before 112 deg C. Does it feel really hot to the touch?

If it is really getting that hot, I seriously doubt that one of the laptop cooling pads is going to make much difference.

She says the bottom is hot to the touch.
 
It probably is temp reading error. AMD uses thermal margin which can be found in "AMD Overdrive" software.
Most software will use the reported sensor value in a wrong way giving you impossible values.
 
Well, AMD temp measurements is a bit of a problem in general. All 3rd party temp software is focused on Intel. I would try Erenhardt's suggestion of using AMD Overdrive.
 
SpeedFan is the only 3rd-party tool I've found that can read the APU temps properly. Give that a shot. HWMonitor seems to read twice as high as it should (your 112C might actually be 56C, which is reasonable under load).
 
Back
Top