Hi to all,
I have some problems with my ASUS Ati Radeon 9600XT (I bought this card a few days ago). I have a VIA694T
Socket370 ATX Mainboard running Celeron 1300A. I installed the card correctly then I get the display. After
instaling the drivers I want to see the power of the card then I run Need for Speed Underground with all
the details on and with a 1280*1024 resolution. It worked fine but after 20 min the game freezed. I run
PES3 (pro evalution soccer3) after 15 min it freezed again. Afterwards I was a bit freightened so I
installed Smartdoctor program (came with ASUS's driver cd) to see if there is something wrong. BINGO the
program says that my AGP bus VDDQ voltage is 1,51V and it was written in red. When I checked the manual
there says it must be 3,3V. After this I planned to upgrade my system (Mainboard, CPU, RAM). So I checked
some sites and ASUS's mainboard site so I am now planning to buy "ASUS P4C800 mainboard". But there is
something scratching my brain. In the board's specification table which is here:
http://www.asus.com/prog/spec.asp?m=P4C800&langs=01 says: 1 x AGP Pro/ 8X/ 4X (0.8V, 1.5V only) but the
smartdoctor and the manual says that "AGP bus VDDQ voltage must be 3,3V. So what? Is there something that I
don't know? I need advices
Thanx for reading till here.
Cem Louis
I have some problems with my ASUS Ati Radeon 9600XT (I bought this card a few days ago). I have a VIA694T
Socket370 ATX Mainboard running Celeron 1300A. I installed the card correctly then I get the display. After
instaling the drivers I want to see the power of the card then I run Need for Speed Underground with all
the details on and with a 1280*1024 resolution. It worked fine but after 20 min the game freezed. I run
PES3 (pro evalution soccer3) after 15 min it freezed again. Afterwards I was a bit freightened so I
installed Smartdoctor program (came with ASUS's driver cd) to see if there is something wrong. BINGO the
program says that my AGP bus VDDQ voltage is 1,51V and it was written in red. When I checked the manual
there says it must be 3,3V. After this I planned to upgrade my system (Mainboard, CPU, RAM). So I checked
some sites and ASUS's mainboard site so I am now planning to buy "ASUS P4C800 mainboard". But there is
something scratching my brain. In the board's specification table which is here:
http://www.asus.com/prog/spec.asp?m=P4C800&langs=01 says: 1 x AGP Pro/ 8X/ 4X (0.8V, 1.5V only) but the
smartdoctor and the manual says that "AGP bus VDDQ voltage must be 3,3V. So what? Is there something that I
don't know? I need advices
Thanx for reading till here.
Cem Louis
Facebook
Twitter