blindjoe14
Junior Member
I upgraded a computer, now it lasts roughly 30 seconds before it freezes
System specs:
P3 800 (out of other computer)
Soltek Sl-65 KV (new)
256 mb Ram (new)
20 gig hd (no os on it yet)
Voodoo 3
HP 4x burner
230W powersupply
It lasts about 30 seconds, no matter what you do. It will check the ram, the processor, etc.
It will also start loading from the floppy boot disk. But only until it freezes. This will happen in the Bios setup, if trying to boot from the hd thats not bootable, anything.
Ive clocked it down, changed the vid card to an old riva128, unplugged all the drives except the floppy, changed the powersupply, and nothing works.
If there is someone out there who could help out it would be very appreciated.
System specs:
P3 800 (out of other computer)
Soltek Sl-65 KV (new)
256 mb Ram (new)
20 gig hd (no os on it yet)
Voodoo 3
HP 4x burner
230W powersupply
It lasts about 30 seconds, no matter what you do. It will check the ram, the processor, etc.
It will also start loading from the floppy boot disk. But only until it freezes. This will happen in the Bios setup, if trying to boot from the hd thats not bootable, anything.
Ive clocked it down, changed the vid card to an old riva128, unplugged all the drives except the floppy, changed the powersupply, and nothing works.
If there is someone out there who could help out it would be very appreciated.
