Soft Menu Settings for Celeron @900mhz on Abit BH-6 w/ "SS" bios

[looper]

Just flashed to "SS" bios, and put in Celeron OC to @900mhz/Abit slotket/Alpha HSF.

Should any of these softmenu and chipset settings be changed ?

CPU operating speed..........."user define"
turbo........................."disable"
External clock(pci)..........."100mhz(1/3)"
Multiplier factor............."x 8.5"
Sel 100/66 # signal..........."High"
AGPCLK/CPUCLK................."2/3"
L2 cache latency.............."def"
Speed Error Hold.............."disabled"
CPU power supply.............."user define"
core voltage.................."1.7v"
sdram pre-chg control........."disabled"
sys. bios cacheable..........."disabled"
video bios cacheable.........."disabled"
video ram cacheable..........."disabled"
I/O recovery 8 + 16..........."1"
AGP aperture size............."64"
Spread spectrum..............."disabled"
sys temp......................"33*C/91*F
V core........................"1.72 v"

Thanks for ideas........all seems stable so far......but can any of these settings be changed to further tweak ? Or, are some not good and may possibly cause probs. soon ?

Have V3-3000 PCI vid card... next week will install GeForce 2-GTS (Elsa)

 

[WildDreamer]

Everything looks fine, but you might want to enable the turbo mode, which puts the bus speed at 103. That would give you a speed of 927MHz. Give that a try and see if its stable.