So who's at fault here? *UPDATED*

[The Batt?sai]

Originally posted by: OdiN

Originally posted by: quasarsky
yea i open alot of stuff. i even opend my megaworks sub box. i didnt' feel like open the scanner up. to me that feels like the equivalent of opening up my digital camera.

plus if it didnt' fix it canon would know and not take it back! :-O

Did it have a warranty seal? Most scanners do not.

dude what was the thing u said i could do to fix it?

btw i looked for a warranty seal, there is none. which is besides the point. because the instructions say not to open the scanner, there are no servicable parts inside


and even more besides the point...

I couldn't find ANY screws anywhere on the scanner! :shocked::shocked::shocked:

 

[tfinch2]

Originally posted by: mosco
This thread is crazy. It was a neutral rating! If someone sent me something that didn't work I would be pissed to. I don't care what the person does to fix it, it still isn't a positive experience. People shouldn't get upset over a neutral rating.

So you stop shopping at a particular retailer when you get a defective product?

 

[Viper GTS]

Originally posted by: mosco
This thread is crazy. It was a neutral rating! If someone sent me something that didn't work I would be pissed to. I don't care what the person does to fix it, it still isn't a positive experience. People shouldn't get upset over a neutral rating.

The evaluation should reflect how the situation was handled. Receiving a dead item is NOT a big deal, how the seller handles it is.

Viper GTS

 

[Leper Messiah]

tfinch, might wanna tone it down a bit, but still, Terumo, seriously...are you doing this just to get a rise out of people? You can't actually be serious....

oh yeah. I concur with the nomination for ownage of the year 2k6.

 

[Terumo]

Originally posted by: BigJ
Terumo, you still haven't addressed the question I asked you.

Don't even bother with Terumo anymore. She's a very obvious troll. It's that simple.[/quote]

BTW, what happened to Shinerburke, again??

Terumo

 

[Terumo]

Originally posted by: Leper Messiah
tfinch, might wanna tone it down a bit, but still, Terumo, seriously...are you doing this just to get a rise out of people? You can't actually be serious....

oh yeah. I concur with the nomination for ownage of the year 2k6.

Only penile boys are interested in slavery.

That's why women own "it" too.

Terumo

 

[Terumo]

Originally posted by: tfinch2
Terumo, you still haven't addressed the question I asked you.

And won't after your PM. This isn't a game, TF. You don't PM folks to measure your dick publicly.

Terumo

 

[SurgicalShark]

Originally posted by: Terumo

Originally posted by: BigJ
Terumo, you still haven't addressed the question I asked you.

Don't even bother with Terumo anymore. She's a very obvious troll. It's that simple.

BTW, what happened to Shinerburke, again??

Terumo
[/quote]


Definitely a troll... Let's keep our heads calm and eyes focused.

 

[Leper Messiah]

Originally posted by: Terumo

Originally posted by: Leper Messiah
tfinch, might wanna tone it down a bit, but still, Terumo, seriously...are you doing this just to get a rise out of people? You can't actually be serious....

oh yeah. I concur with the nomination for ownage of the year 2k6.

Only penile boys are interested in slavery.

That's why women own "it" too.

Terumo

WTF? that makes absolutely no sense.

 

[tfinch2]

Originally posted by: Terumo

Originally posted by: tfinch2
Terumo, you still haven't addressed the question I asked you.

And won't after your PM. This isn't a game, TF. You don't PM folks to measure your dick publicly.

Terumo

I asked you a legimate question that you are avoiding. So are PM's private or public? Make up your mind.

Who said anything about dick measuring though?

 

[SurgicalShark]

Nobody reply to Terumo and B--> Terumo

 

[Hossenfeffer]

Oy. Don't feed the trolls. The hasty neutral was the only real issue here. And we've got oodles of pages of bait for what?

 

[OdiN]

Originally posted by: quasarsky

Originally posted by: OdiN

Originally posted by: quasarsky
yea i open alot of stuff. i even opend my megaworks sub box. i didnt' feel like open the scanner up. to me that feels like the equivalent of opening up my digital camera.

plus if it didnt' fix it canon would know and not take it back! :-O

Did it have a warranty seal? Most scanners do not.

dude what was the thing u said i could do to fix it?

btw i looked for a warranty seal, there is none. which is besides the point. because the instructions say not to open the scanner, there are no servicable parts inside


and even more besides the point...

I couldn't find ANY screws anywhere on the scanner! :shocked::shocked::shocked:

I don't listen to instruction booklets. In fact I never read them. It may say there are no serviceable parts inside, but trust me there are.

I don't doubt you couldn't find screws. There may not be any and the scanner may use plastic latches all the way around the seam.

 

[The Batt?sai]

i figured it out! people love posting here so much because in the fs/ft thread u can only bump ur own thread once every 4 hours :-D

jk LOL :-D

 

[Terumo]

Originally posted by: SurgicalShark
Definitely a troll... Let's keep our heads calm and eyes focused.

Is that all left?

Let's see so far by these so-called high heaters (more like BSers) I've been accussed of being....

1. Quasarsky (despite we live states away and totally different IPs and emails).
2. Claimed to be Quasarsky due to my eBay nick.
3. Claimed to be someone else entirely since I posted under TerumoII.

And now these same folks claiming I'm a troll now.

Very bad track record and growing.

Terumo

 

[BigJ]

Originally posted by: Terumo

Originally posted by: SurgicalShark
Definitely a troll... Let's keep our heads calm and eyes focused.

Is that all left?

Let's see so far by these so-called high heaters (more like BSers) I've been accussed of being....

1. Quasarsky (despite we live states away and totally different IPs and emails).
2. Claimed to be Quasarsky due to my eBay nick.
3. Claimed to be someone else entirely since I posted under TerumoII.

And now these same folks claiming I'm a troll now.

Very bad track record and growing.

Terumo

Care to show me where I did?

Or do you keep ignoring my rebuttal to that

 

[The Batt?sai]

Originally posted by: OdiN

Originally posted by: quasarsky

Originally posted by: OdiN

Originally posted by: quasarsky
yea i open alot of stuff. i even opend my megaworks sub box. i didnt' feel like open the scanner up. to me that feels like the equivalent of opening up my digital camera.

plus if it didnt' fix it canon would know and not take it back! :-O

Did it have a warranty seal? Most scanners do not.

dude what was the thing u said i could do to fix it?

btw i looked for a warranty seal, there is none. which is besides the point. because the instructions say not to open the scanner, there are no servicable parts inside


and even more besides the point...

I couldn't find ANY screws anywhere on the scanner! :shocked::shocked::shocked:

I don't listen to instruction booklets. In fact I never read them. It may say there are no serviceable parts inside, but trust me there are.

I don't doubt you couldn't find screws. There may not be any and the scanner may use plastic latches all the way around the seam.

ok so what would i need to have done to fix the old one? i can't ship it back till tmw. the ups shop is closed.

 

[OdiN]

Originally posted by: Terumo

Originally posted by: SurgicalShark
Definitely a troll... Let's keep our heads calm and eyes focused.

Is that all left?

Let's see so far by these so-called high heaters (more like BSers) I've been accussed of being....

1. Quasarsky (despite we live states away and totally different IPs and emails).
2. Claimed to be Quasarsky due to my eBay nick.
3. Claimed to be someone else entirely since I posted under TerumoII.

And now these same folks claiming I'm a troll now.

Very bad track record and growing.

Terumo

Well...you are on my DNT list too BTW.

I don't really care who you are. You are not listening to reason and you are just trolling in this thread.

 

[The Batt?sai]

Originally posted by: Terumo

Originally posted by: SurgicalShark
Definitely a troll... Let's keep our heads calm and eyes focused.

Is that all left?

Let's see so far by these so-called high heaters (more like BSers) I've been accussed of being....

1. Quasarsky (despite we live states away and totally different IPs and emails).
2. Claimed to be Quasarsky due to my eBay nick.
3. Claimed to be someone else entirely since I posted under TerumoII.

And now these same folks claiming I'm a troll now.

Very bad track record and growing.

Terumo

don't forget they accused u of being my gf, bf..? :shocked: and dog LOL. someone watches family guy way too much :-D.

all this for a neutral. i wish some people would use their energy for more constructive purposes.

 

[SurgicalShark]

Originally posted by: Terumo

Originally posted by: SurgicalShark
Definitely a troll... Let's keep our heads calm and eyes focused.

Is that all left?

Let's see so far by these so-called high heaters (more like BSers) I've been accussed of being....

1. Quasarsky (despite we live states away and totally different IPs and emails).
2. Claimed to be Quasarsky due to my eBay nick.
3. Claimed to be someone else entirely since I posted under TerumoII.

And now these same folks claiming I'm a troll now.

Very bad track record and growing.

Terumo

Who the f*** are you? Just stay out of controversy then!! Are you an Text

 

[OdiN]

Originally posted by: quasarsky

Originally posted by: OdiN

Originally posted by: quasarsky

Originally posted by: OdiN

Originally posted by: quasarsky
yea i open alot of stuff. i even opend my megaworks sub box. i didnt' feel like open the scanner up. to me that feels like the equivalent of opening up my digital camera.

plus if it didnt' fix it canon would know and not take it back! :-O

Did it have a warranty seal? Most scanners do not.

dude what was the thing u said i could do to fix it?

btw i looked for a warranty seal, there is none. which is besides the point. because the instructions say not to open the scanner, there are no servicable parts inside


and even more besides the point...

I couldn't find ANY screws anywhere on the scanner! :shocked::shocked::shocked:

I don't listen to instruction booklets. In fact I never read them. It may say there are no serviceable parts inside, but trust me there are.

I don't doubt you couldn't find screws. There may not be any and the scanner may use plastic latches all the way around the seam.

ok so what would i need to have done to fix the old one? i can't ship it back till tmw. the ups shop is closed.

Well I would need to see it (or pics). What I'm thinking by your description is that there is simply a loose cable/connection. What I would have tried is popping the scanner apart and unplugging/plugging back in the connections between the scanning unit and the PCB.

 

[Terumo]

Originally posted by: tfinch2
I asked you a legimate question that you are avoiding. So are PM's private or public? Make up your mind.

Who said anything about dick measuring though?

It's what you're doing now. You're trying to win at any cost to help cure a case of flaccidity.

Don't PM folks to carry out warfare on the forums.

Terumo

 

[mosco]

Originally posted by: OdiN

Originally posted by: quasarsky

Originally posted by: OdiN

Originally posted by: quasarsky
yea i open alot of stuff. i even opend my megaworks sub box. i didnt' feel like open the scanner up. to me that feels like the equivalent of opening up my digital camera.

plus if it didnt' fix it canon would know and not take it back! :-O

Did it have a warranty seal? Most scanners do not.

dude what was the thing u said i could do to fix it?

btw i looked for a warranty seal, there is none. which is besides the point. because the instructions say not to open the scanner, there are no servicable parts inside


and even more besides the point...

I couldn't find ANY screws anywhere on the scanner! :shocked::shocked::shocked:

I don't listen to instruction booklets. In fact I never read them. It may say there are no serviceable parts inside, but trust me there are.

I don't doubt you couldn't find screws. There may not be any and the scanner may use plastic latches all the way around the seam.

You want him to open up the scanner and try to fix it? Thats a good way to mess up the glass and get dust in the unit. I could understand opening something things, but not a scanner.

Originally posted by: tfinch2

Originally posted by: mosco
This thread is crazy. It was a neutral rating! If someone sent me something that didn't work I would be pissed to. I don't care what the person does to fix it, it still isn't a positive experience. People shouldn't get upset over a neutral rating.

So you stop shopping at a particular retailer when you get a defective product?

I don't understand the point of that question.


Its just a neutral rating... Its not the end of the world. I don't see why this thread had to be made.

 

[BigJ]

Originally posted by: mosco

Originally posted by: tfinch2

Originally posted by: mosco
This thread is crazy. It was a neutral rating! If someone sent me something that didn't work I would be pissed to. I don't care what the person does to fix it, it still isn't a positive experience. People shouldn't get upset over a neutral rating.

So you stop shopping at a particular retailer when you get a defective product?

I don't understand the point of that question.


Its just a neutral rating... Its not the end of the world. I don't see why this thread had to be made.

And I don't see why he was giving an unwarranted neutral.

 

[The Batt?sai]

i tried to do that with someone's combo dvd/vhs player. turns out it wasn't working cause someone had apparently dropped the thing and something got loose inside it. i couldn't figure out where the piece went too. but it appeared to be part of the tray loading mechanism.

i'll still post pics of the scanners when the batteries are done.