SMC SMC2804WBR Barricade 802.11g Router $29.99 AR

Toggle sidebar Toggle sidebar
M

mboy

Diamond Member
Jul 29, 2001
3,309
0
0
Damn, just ordered it from buy.com for $39.99 after rebate. Oh well.
 
H

hallf

Senior member
Dec 4, 2000
513
0
0
Almost bit on this one, but then read the user reviews at Amazon and there's a high percentage of one-star reviews. I have a really old SMC 7004 "wired" router and it's been great, but I'm not sure if this newer product will give the same experience based on those reviews.
 
T

Tazer98

Junior Member
May 3, 2002
7
0
0
I have both the 7004 and the 2804W both work well indepently but I can't connect both of them at the same time to use the wireless of one and the print server of the other. Physically connecting them is ok but when you configure one router it sets the configuration for both. Any help out there for this connection?

Overall they have performed well.

tazer98
 
T

Tash

Senior member
Apr 20, 2001
552
0
0
I have the router and it works great with my 802.11b D-Link cards. I got it because people reported greater range than other routers. I am getting much better range then Netgear or D-Link 802.11b routers. But I also heard that the SMC PC and PCI 802.11g cards are to be avoided.

I also had a problem where Microsoft Update would hang with other routers and no problems with the SMC.
 
0roo0roo

0roo0roo

No Lifer
Sep 21, 2002
64,795
84
91
what about the card? frys store in bay area told me that they don't carry em?
 
1

1943

Junior Member
Feb 19, 2004
2
0
0
I have used this router and card for both cable and DSL.

Very easy setup with included CD.

It has worked flawlessly for me.

Finding how to setup security features takes some digging.

I get an Excellent or Very Good signal strength throughout
my smallish 2-story house.
 
S

ScottS

Member
Feb 2, 2001
33
0
0
Originally posted by: Tazer98
I have both the 7004 and the 2804W both work well indepently but I can't connect both of them at the same time to use the wireless of one and the print server of the other. Physically connecting them is ok but when you configure one router it sets the configuration for both. Any help out there for this connection?

Overall they have performed well.

tazer98
Click to expand...

I have my 7004 hooked up to a DLink 624 and I am able to use the print feature of the 7004. I had to do several things to make it work : (1) hook up lan port of 624 to lan port of 7004 (2) turn off DHCP on the 7004 (3) set the base address of the 7004 to a different on than the 624, and not in the range of addresses provided automatically by the 624 - I used 192.168.0.2. If all this works for you, log into your 7004 to verify access, and then point PRTmate to the routers new IP. You are in effect making the 7004 only a switch, as your 2804W will handle the router functions for your network now.
 
G

Gigaset

Junior Member
Sep 17, 2002
16
0
0
I have this as my router. Not only is it great for that price, but it comes with Stateful PAcket Inspection (SPI) and VPN passthrough (not vpn). The problem I had though when I got it was that signal kept on dropping, and it would freeze. I had upgraded to firmware 1.10. Much worse. So, I dealt with the problem for awhile, until the upgrade to 1.11a. I didn't have bellsouth, so I didn't need that fix, but the release notes specified other changes. From that upgrade on, it has been working flawlessly. No hangs, running for about 4 months now. No signal drops, which pissed me off early on. It's a solid router, outside of it's initial problems. I chose it because it had the best range from my research, outside of the new chipsets out there, specifically the Dell router. That's the best, but I ain't paying over $50 for a router.
 
N

noko

Junior Member
Jan 25, 2001
9
0
0
What am I missing here?

The item description says $29.99 after a $40 rebate but the price reads as $79.99. Same in the shopping cart during checkout.
 
C

Cheapest

Senior member
Feb 15, 2000
435
0
0
Shipping cost $7.xx. The local Fry's does not honor the same prices that is what they told me.
 
T

Tazer98

Junior Member
May 3, 2002
7
0
0
Sorry about the previous blank post.

Thanks ScottS, will try it out this weekend.

tazer98.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom