• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

SLK900's and 92mm Panaflo L1A's on P4's

S

seismik

Senior member
Just wondering what you guys with SLK900's and 92mm Panaflo L1A's on P4's are getting for CPU temps? I think my AS3 should be just about through the breakin period, and I'm getting 42c idle with a case temp of 35c, so 7 over idle. Heat wave is 30c or so every day, so those should come down a little when the temp drops outside -- I hoped for a little better than 42c.
 
I get around 49C idle and 60C load, and ambient isn't even that hot. I'm using an Abit KR7A-Raid. My motherboard maybe calibrated differently then yours. 42C is perfectly acceptable.
 
2.4C, SLK900U + 92mm L1A undervolted to 8volts (rpm is 1500, stock is 2050). Ambient temps around 90-95°C. Case temp 35°C, CPU idle temp 39°C, Load (2xPrime95) temp 51°C. Early morning amient temp of around 75°F gives me case temp of 31-32°C, idle temp of 33-34°C, load temp of 43°C.

Your temps are a little high but maybe your board reports temps too high like the Abits do.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top