• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

SLK-800U and older 478 mobos

L

lchyi

Senior member
Are these compatible? Because I have an ASUS P4B533-v board and it doesn't have the holes in by the processor for the heatsink. I'm currently looking at the instructions, but i'm thoroughly confused now. Any help?
 
Your board does have the holes required to mount the SLK800, they're the same ones currently used to mount the stock P4 HSF retention frame. You need to remove the stock frame from the board which will expose the four mounting holes. You can pry up the four white plastic locking pins which will let you pull the black plastic frame off the board, exposing the four mounting holes. Then you can mount the SLK800 onto the board.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top