• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Sisoft Sandra says that my PCI and AGP is over bussed...

S

stockjock

Diamond Member
I have a TBird AXIA 1.2 (not overclocked yet) on a EPOX 8KTA3 board. The FSB is set to default..so I'm guessing it's at 133 because the Tbird is posting at 1.2.
But in Sandra, when I run the performance wizard it tells me that my PCI and AGP slots are not running at the correct bus speed, that I need to slow down the FSB. What should I have the FSB set to..IE... 133-33-.5 etc...etc..

Thanks in advance for your help
 
I had that same problem with my previous system when I run Sandra. It was a known problem with the software. Do you have the latest version? You can get it here. If it is a 1.2GHz/133MHz FSB cpu then you cpu settings should be FSB = 133MHz and multiplier = 9. I've never had any experience with that mobo before, but you might have to set the AGP and PCI dividers. If you're running a 133MHz FSB then just make sure that the AGP divider is set to 1/2 and the PCI divider is set to 1/4. I know on my Asus board the dividers are set automatically.
 
Thanks for the info guys...I have Sandra 2001, but I don't think it's the newer version that Shooters pointed me to. I don't recall seeing any PCI or AGP dividers in the bios, but will look again. I know the FSB is set to 133 and the multiplier is 9, I have seen that... I was just wondering if I need to set the FSB manually instead at default.

Again thanks for that Sandra site..I will upgrade it tonite..
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top