Question Should I modify this build or am I good to go?

[G-Wiz]

Hi, could someone have a look at this build and tell me if I should make any modifications due to compatibility etc.

CPU: Ryzen 7 5800X (https://www.amazon.co.uk/dp/B0815XF...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
Mobo: ROG STRIX B550-I GAMING Mini-ITX (https://www.amazon.co.uk/dp/B089T3S...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
Ram: G.Skill RipJaws V Series 32GB (2 x 16GB) 288-Pin SDRAM DDR4 4000 (PC4-32000) (https://www.amazon.co.uk/dp/B08TR1B...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
AIO: ARCTIC Liquid Freezer II 240 (https://www.amazon.co.uk/dp/B07WSDL...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
PSU: Cooler Master V850 SFX Gold (https://www.amazon.co.uk/Cooler-Mas...psu+sfx+850&qid=1633614158&s=computers&sr=1-1)
Case: Cooler Master MasterBox NR200 Mini ITX (https://www.amazon.co.uk/dp/B08CZNB...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)

In regards to case fans I will be throwing away the two fans that come with the case. It has room for seven fans, two 120's at the top (which I intend to be used by my AIO radiator), two 140's on the side, two 120's on the bottom and a 92mm on the rear.
These are the fans I will buy to fill the spare fan spaces:

2x140mm: Corsair CO-9050044-WW ML Series ML140 140 mm Low Noise High Pressure Premium Magnetic Levitation Fan (https://www.amazon.co.uk/dp/B01G5I6...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
2x120mm: Corsair CO-9050039-WW ML Series ML120 120 mm Low Noise High Pressure Premium Magnetic Levitation Fan (https://www.amazon.co.uk/dp/B01G5I6...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)
1x96mm: Noctua NF-B9 redux-1600 PWM, High Performance Cooling Fan, 4-Pin, 1600 RPM (https://www.amazon.co.uk/NF-B9-redu...+fan+noctua&qid=1633614739&s=computers&sr=1-5)

Since that mobo only has a single fan connector I will be plugging all those fans into this fan controller:

Gazechimp PC Fan Speed Controller 6 Way Cooling Fan Hub (https://www.amazon.co.uk/dp/B078LQZ...colid=WJGWRJ91PGIF&psc=1&ref_=lv_ov_lig_dp_it)

My main concerns are about the AIO, would I be better getting a different one? Also would it fit in the top of the case? The reason I've gone for a 850 PSU is just so I can power a good GPU one day in the future.

Any help/advice is appreciated,
Thanks