Sempron Socket 462

[ionoxx]

I'm currently running a new desktop that has a Sempron 2300+ (1.583GHz) @ 1.9GHz. Its basically just 200FSB instead of 166FSB. I know that they clock them up to 2800+ and 3000+ (2.0GHz), and it's probably the same chips but binned differently. If i were to leave it always on, how stable would it remain in the long run?

 

[ssvegeta1010]

Download and run Prime 95. If it does not fail running overnight, then your OC is stable. If it fails clock the FSB back to, say, 190, and see if it will pass then.

 

[ionoxx]

See, the thing it, its running on a Asus A7V400-MX, its not jumperfree and you only have the choice of 100/133/166/200

 

[Shimmishim]

clockgen should do it.

 

[imported_Kensai]

Just don't push the voltages too high.

 

[Jimmah]

I get mine to 2.15ghz if I up the voltage to 1.7, usually its stable there if its cool in here, else I keep it at 2.07ghz and 1.6v just to be safe. If I had an nforce2 board I'd have it at 2.2ghz no problem, damn the unlocked Via's.