SBS 2003 - DHCP YES - PING SERVER / INTERNET = NO HELP? [solved]

[jcmuse]

Hi,
i tried to setup my sbs 2003 for the first time this morning. Did not go so well.
I got stuck on networking, here is my config:

modem -> Linksys Router -> SBS ext nic | SBS | SBS int nic --> clients

I set my linksys router up as follows:
disabled NAT
forwarded all ports to the IP i assign the server (ext NIC)
PPOEE etc is all configured there
DHCP disabled
IP: 192.168.1.1

For my sbs, here is the config:
ext nic ("Network Connection"):
IP: 192.168.1.145
Gateway: 192.168.1.1
DNS: DNS SERVERS
Subnet: 255.255.255.0
int nic ("Server Network Connection")
IP: 192.168.1.200

These are my setting coming into the wizard which sets the rest.
DHCP works, my clients connect to the int NIC, 192.168.1.200, they can ping eachother, but none can ping the server or access the net.

Am i missing something? I think im going to start from scratch tomorrow and see what happens. Is my configuration correct? When i tried to do http://mysbsname/configurecomputer (or w/e they tell you to do to join the server) nothing happens.

ARGHH!! TIA


solved: my ip configuration was no good.

 

[Zugzwang152]

how come you need the linksys if your server is doing all of its functions and receiving all the traffic?

 

[jcmuse]

because that is what is recommended.

 

[jcmuse]

i should also note that i am using ISA.