• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Sandra not reading correctly??

H

H4rm

Member
I have an Abit KT7-Raid motherboard, 1 ghz Socket A T-bird, PC150mhz Mushkin HSDRAM, and Sparkle 300 w Pwr supply. After having run Sandra Pro on win98 and Win Millenium, my FSB reads 100 mhz? It should read 133 or 150 mhz right? I do have Host+PCIclk enabled in the Bios. Why wont Sandra read this correctly, and how do i fix this or is there another software that will give me good readings on my ram speed or FSB speed?
 
Sandra is reading the front side bus correctly. Athlon's use a 100mhz bus the via chipset will add 33mhz to the memory bus if you tell it to and you have memory that can handel it. You can change you bus speed under the cpu options in the bios but that would be over clockin your cpu. I have a 800mhz over clocked the bus to 112 + 1 = 113 x 8 = 904. If you over clock your mileage may vary there's lots of info on the forums on over clocking you should go through it your inclined to do so.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top