Chronic321
Member
Asus A7v333 (VIA KT333)
Sandra is giving me this error
Warning 1206 - Device latency is high - the higher the latency, the more data a device can transfer in one go. The device may be hogging the bus for too long. Some video card drivers set the latency high in order to perform faster. The problem is that other devices (especially sound cards, network) won?t have enough time to transfer their data resulting in lower performance (e.g. sound drop outs, lockup). Generally, all devices should have latency of 32, with high performance devices (e.g. video card, disk, giga-LAN) with 64 and AGP to 128.
Fix: Go to BIOS Setup\Settings\PCI & AGP Devices and reduce PCI latency to 64 or 32. Contact the mainboard manufacturer or video card manufacturer for more details.
I went to the BIOS, timer is set to 32, 64 doesn't help. Diables QOS (Quality of Packet Service) same problem. Is the PCI Latency patch the solution, any other people with this problem? The latency patch is not recommended for the kt333 (Although it is for the kt226a).
Sandra is giving me this error
Warning 1206 - Device latency is high - the higher the latency, the more data a device can transfer in one go. The device may be hogging the bus for too long. Some video card drivers set the latency high in order to perform faster. The problem is that other devices (especially sound cards, network) won?t have enough time to transfer their data resulting in lower performance (e.g. sound drop outs, lockup). Generally, all devices should have latency of 32, with high performance devices (e.g. video card, disk, giga-LAN) with 64 and AGP to 128.
Fix: Go to BIOS Setup\Settings\PCI & AGP Devices and reduce PCI latency to 64 or 32. Contact the mainboard manufacturer or video card manufacturer for more details.
I went to the BIOS, timer is set to 32, 64 doesn't help. Diables QOS (Quality of Packet Service) same problem. Is the PCI Latency patch the solution, any other people with this problem? The latency patch is not recommended for the kt333 (Although it is for the kt226a).
