San Diego Tempatures

[ohwell78]

Im running my San Diego 3700 at 2.6 ghz 1.56 volts. Load is 53c idle 36c.

I was able to boot at 2.8 ghz but it needed over 1.6 volts and temps around 60c.

I was wondering what a good stable range was and what results everyone else has had?

 

[Shimmishim]

i'm running mine at 1.6 volts and 2.85 ghz. load temps depend on my ambient. around 50C's to 53C's is my load temp with 23C ambient.

 

[sangyup81]

What kind of HS/Fan setup are you using?

 

[ohwell78]

Im using stock I figure whatever i can get with it is good enough without hurting the chip. Though I have to say its one of the better stock fans/heatsink ive seen.

 

[rise]

a64 max temp proggie.

saw this in a thread at xs here. theres more info about it and its validity but seems pretty accurate to me.

fwiw my 3700 sandy is 1.54v max ~50.

edit for clarification- the volt/temp i said is what i run, not what the program says (57c)

 

[KoolDrew]

I wouldn't go over 1.6 for the voltage. Max temperature should be like 55C. Of course less for both temp and voltage is always preferred.

 

[ohwell78]

Whats the best program in windows for testing temp. Im using Speedfan, is there anything better?

 

[GuitarDaddy]

Mine runs 2805mhz 1.55v 52-53c load

 

[Bona Fide]

Originally posted by: ohwell78
Whats the best program in windows for testing temp. Im using Speedfan, is there anything better?

Try Motherboard Monitor 5 or Smart Guardian.

 

[GMtheBest]

see my sig for specs

running at 1.50 volts, idle 39 degrees, 53 degrees at load, stock heat sink and fan

Processor doesn't want to go any higher

 

[Fallengod]

Im very hot! Im dead sexy.

 

[Dadofamunky]

As reported by the MSI Neo2 (take it for what it's worth) I'm at 28-29C idle and 41-43C on load. Supposedly they fixed the temperature reporting bug in the official 1.9 BIOS release. I AM running default voltages at 2.5 GHz, which is plenty good enough for me. Also see sig.

 

[BigCoolJesus]

Are Venice's just that much more cooler?

my Venice is running 2.7GHz at 1.72v and im only pushing 50C on high loads

 

[Shimmishim]

Originally posted by: sangyup81
What kind of HS/Fan setup are you using?

wtercooling.

temps run 52 to 53C's with vapochill mico extreme though. its a good heatsink fan unit

 

[Keysplayr]

"How hot and fast are you?"

That's an extremely personal question, don't you think?

/comic relief

 

[Lithan]

I dont remember exactly, but very cold. <50*C full load on xp-120 And panaflo 30dBA @ 1.7vcore 2805mhz Full prime Large fft load.

 

[Icepick]

Originally posted by: ohwell78
Whats the best program in windows for testing temp. Im using Speedfan, is there anything better?

Everest is the best IMHO and what I use.

 

[sOKaLiBoY]

3700+ 260x11=2860 1.7v 27c idle - 39c load watercooling

 

[TotallyWired]

3700 + 250x11=2750 1.55v 27c idle 44c load (Prime95)

MBM 5 and EVEREST

********************************************************************************************

AMD64 3700 @ 2.75GHz + THERMALRIGHT XP-90 + ENERMAX UC-9FAB-B 90mm fan @ 2700RPM
MSI K8N NEO2 Platinum BIOS 1.8
OCZ EL Platinum rev2 (2x) 512MB @ 2-2-2-5 1T
BFG 6800GT OC 71.89 @ 435MHz/1.13GHz + ZALMAN VF700-Cu
WD SATA 74g Raptor x 2
WD ATA100 80g x 2
SB Augigy2 ZS
NEC Black ND-3540A DVD DL
NEC Black ND-3000A DVD DL
COOLERMASTER Black Stacker case with PC Power & Cooling Turbo-cool 510 SLI
SONY 21" GDM-5410 Flatscreen crt
KLIPSCH Promedia THX speakers
LOGITECH MX518 + FUNC 1030 Black mousepad

 

[kman79]

3700 255X11 2805MHz 32c Idle 44c Max load, XP90 w/ 100+CFM Delta fan, it's not quiet

 

[ohwell78]

Is there any official statement from amd about max voltage? Ive seen max temp but not voltage

 

[Dadofamunky]

Originally posted by: keysplayr2003
"How hot and fast are you?"

/comic relief

You don't wanna know, sailor.