Rivatuner discrepancies.....

[Duvie]

In the ocing area I had it set to 375 but when I use the monitoring tools also under rivatuner it says 351mhz....

What the reason for this...Is it because the stock BFG OC is already +25mhz higher then a stock 6800???

By the way Rivatuner 15.3 version.....

I was testing some speeds for stability and I didn't look when it was at 350 (default) or when initially had it at 390....I guess I will need to....

idle used to be 44c now it is 54-56c idle since upgrading drivers from 71.24's....Load hower went to 64c in both cases.....

 

[THUGSROOK]

go back to 71.24

 

[Fenuxx]

I would upgrade to the new 15.4 version. See if that helps.

 

[Duvie]

Originally posted by: THUGSROOK
go back to 71.24

You know I amy do that as it had no issues...however in fairness I should try the 71.84 WHQL's first....

 

[Insidious]

I really like the current WHQLs (71.84)

As to the speed indications, remember there are 2D and 3D settings for the clocks. Make sure you know which mode your card is in when you read speeds.

-Sid

 

[Duvie]

well I was gaming but I have to quit the game to see the score...however I am recording it and it said the 351mhz the whole time....in and out of the game...game should be 3d mode and rivatuner clearly has it stated as 375 as well as to start and load that setting and bootup...

 

[THUGSROOK]

Originally posted by: Duvie
well I was gaming but I have to quit the game to see the score...however I am recording it and it said the 351mhz the whole time....in and out of the game...game should be 3d mode and rivatuner clearly has it stated as 375 as well as to start and load that setting and bootup...

i remember hearing many complaints like this in my GTU thread. ppl tryin to blame my GTU bios but i knew it wasnt the problem. i know you arent using the GTU bios and you are having the same prob.

MSI moboard?
is that the one with the vid card OCing options in its bios?

might wanna check that out 😉