So I've been trying to replace my laptop top lid, by following the instructions found at the following address: http://www.irisvista.com/tech/laptops/Toshiba-Satellite-M70/remove-laptop-motherboard-2.htm
Step 13 says "Carefully pull the wireless antenna cables through the opening and out of the channel."
I did this, and it was fine. There was a bit of masking tape on the cables, but other than that, I just pulled. The cables came out from beneath the plastic layer obscuring the motherboard, so it was impossible to see where exactly they were coming from.
What the tutorial doesn't show, is where those antenna cables were connected to! When putting on the top lid, what are those cables supposed to attach to? Is it the wireless card? And if so, what part of the wireless card? The cables don't really have a clear "shaped head" at the end that can be matched with a similar sized port on the motherboard, as far as I can tell.
Thanks!
Step 13 says "Carefully pull the wireless antenna cables through the opening and out of the channel."
I did this, and it was fine. There was a bit of masking tape on the cables, but other than that, I just pulled. The cables came out from beneath the plastic layer obscuring the motherboard, so it was impossible to see where exactly they were coming from.
What the tutorial doesn't show, is where those antenna cables were connected to! When putting on the top lid, what are those cables supposed to attach to? Is it the wireless card? And if so, what part of the wireless card? The cables don't really have a clear "shaped head" at the end that can be matched with a similar sized port on the motherboard, as far as I can tell.
Thanks!