Recommendations for OCing my 1.4 Tbird

[D1g1talS0ul]

I?m wondering what would be the best combination of FSB and CPU Multiplier to achieve a Solid Overclocked Computer.

I've had it running at 10.5X155 1627 but windows tends to crash. As I write this I'm at 11X140. The CPU core voltage is default but the DDR Voltage is up to v2.8. If it would be necessary, what would be a safe voltage to set the CPU at.

CPU: 1.4 AYHJA 6.4.4
RAM: 256MB NANYA <-brand
MB: Epox 8K7A
HSF: Dragon ORB 3
Avg CPU Temp: 120 F
PSU: Enlight 300 Watt

 

[Wind]

It's already a good O/Ced. U might already hit the limit w/ ur currect spec.

 

[sad]

That Enlight PS is a bit wimpy for your setup.

 

[SpeedTrap]

try for 2.5ghz

 

[xcourse]

Since there are many different combos all of which result in the same (or nearly so) cpu speed, you'll find that your overall sys performance will be higher with a higher fsb. So find the highest stable fsb speed and you'll have found the best combo for your system (e.g. if your cpu maxes out at 1550, work from some middle point like 11x140, raising fsb speed and adjusting multiplier accordingly until Windows starts getting flaky or you start getting cold feet, whichever happens first, then back it down a tad and enjoy).