• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Rebuilding an older PC tonight

Chipfiref

Member
Rebuilding this:
Antec P-160
Gigabyte GA-Z68X-UD3H-B3
Intel i7-2600K
Intel stock cooler
16GB Corsair Vengance
Sapphire 6970
Seasonic SS620GB

To this:
Antec P-160
Gigabyte GA-Z68X-UD3H-B3
Intel i7-2600K
Noctua NH-U14S
16GB Corsair Vengance
SAPPHIRE 100351SR Radeon HD 7970 3GB
Seasonic SSR 650RM

Of course I have to take the MB off to put the Noctua back plate on :twisted:

hopefully the Corsair Vengance memory will fit next to the Noctua cooler - it has some thick goofy heatspreaders - otherwise I will have to switch some memory around :twisted:

Interesting, my Sapphire 7970 card is shorter than my Sapphire 6970 card. Not much but I may be able to at leas uset the drive bay opposite the card now.
 
Last edited:
No "rebuild", simply an upgrade.

When I have to take out the Mobo and the PS I call it a rebuild 🙂

Well the Noctua does not like the Corsair Vengance with its crazy heat spreaders. It almost fits but I do not want pressure on the first DIMM from the Noctua fan. The Corsair heat spreader has a needless bulge but it can't be removed. So I decided to do plan B and bring the Noctua fan around to the other side of the Noctua cooler. This will push heat over the memory DIMMs instead of toward the back exhaust fan, but I think it will be OK. Opinions? I can add a 120 fan in the front of this case to do something, possibly positive pressure?

I may buy some new memory eventually with more reasonable heat spreaders and swap memory between machines. I do prefer the air to go right out the fan in the rear.
 
Last edited:
http://www.thefreedictionary.com/rebuilding
re·build (r
emacr.gif
-b
ibreve.gif
ld
prime.gif
)tr.v. re·built (-b
ibreve.gif
lt
prime.gif
), re·build·ing, re·builds
1.
To build again.
2. To make extensive structural repairs on.
3. To remodel or make extensive changes.

http://www.thefreedictionary.com/upgrade
up·grade (
ubreve.gif
p
prime.gif
gr
amacr.gif
d
lprime.gif
)v. up·grad·ed, up·grad·ing, up·grades
v.tr.
3. Computer Science a. To replace (a software program) with a more recently released, enhanced version.
b. To replace (a hardware device) with one that provides better performance

Nice rebuild with upgraded parts. Better CPU heatsink/cooler, faster video card and larger wattage PSU.
 
Last edited:
Are we really at the point where a 2600K is considered an "older PC"? Where's my cane emoticon?

So I decided to do plan B and bring the Noctua fan around to the other side of the Noctua cooler. This will push heat over the memory DIMMs instead of toward the back exhaust fan, but I think it will be OK. Opinions? I can add a 120 fan in the front of this case to do something, possibly positive pressure?

Just flip the fan over so that it's pulling air through the heatsink.
 
Ah, you upgraded your CPU cooler and GPU. 🙂


...and PS

So I had to remove the MB to put the Noctua cooler back plate on, I had to unplug and replace all the power cabling...

System functional again, not quite all back together. I did have some HD trouble on one of my 1.5TB Hitachis. Didn't lose too much data I think but had to do some repairing. Still hearing a methodical click sometimes so it does not look good for this disk.

Still updating some drivers and Catalyst.

Definitely performing well temperature wise.
 
Back
Top