original doc
Version 2.2
March 13, 2008:
-changed TjMax from 95C to 85C for all M0 processors based on an IR temp reading.
-fixed the log file so it can be read correctly in NotePad or WordPad
-added a RealTemp.ini file to the archive that looks like this:
[RealTemp]
TjMax=0
IdleCalibration=0
LogFile=0
The TjMax tag lets you set an offset if you don't agree with the TjMax that RealTemp has selected for your processor. The choices are -3, -2, -1, 0, 1, 2, 3. Each choice provides 5C of adjustment, either positive or negative. If RealTemp says your TjMax=85C but you believe it is really 95C then you would use TjMax=2 in the .ini file to fix things up.
The IdleCalibration ranges from -2 to 2 and will be automatically saved when you close the program.
The LogFile can be set to either 0 or 1. LogFile=1 will turn the log file feature on and this too will be updated when you close the program.
Version 2.21 Update
March 16, 2008
-quick bug fix to correct mis-reported temps if one or more cores reached (PROCHOT#) while using the Idle Calibration feature. Thanks KTE for your testing.
Here's the download.
download here
Version 2.2
March 13, 2008:
-changed TjMax from 95C to 85C for all M0 processors based on an IR temp reading.
-fixed the log file so it can be read correctly in NotePad or WordPad
-added a RealTemp.ini file to the archive that looks like this:
[RealTemp]
TjMax=0
IdleCalibration=0
LogFile=0
The TjMax tag lets you set an offset if you don't agree with the TjMax that RealTemp has selected for your processor. The choices are -3, -2, -1, 0, 1, 2, 3. Each choice provides 5C of adjustment, either positive or negative. If RealTemp says your TjMax=85C but you believe it is really 95C then you would use TjMax=2 in the .ini file to fix things up.
The IdleCalibration ranges from -2 to 2 and will be automatically saved when you close the program.
The LogFile can be set to either 0 or 1. LogFile=1 will turn the log file feature on and this too will be updated when you close the program.
Version 2.21 Update
March 16, 2008
-quick bug fix to correct mis-reported temps if one or more cores reached (PROCHOT#) while using the Idle Calibration feature. Thanks KTE for your testing.
Here's the download.
download here
