• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Ram timings on overclocked E6400

James Bond

James Bond

Diamond Member
My RAM (OCZ Platinum Rev2), is rated at 4-4-4-15 @ 800MHz.

When I look at the timings table on CPU-Z, it shows that for 800MHz, I should run at: 5-5-5-15, and 22TAS.

My FSB is currently at 825, and I'm a little unsure what to run at. Would attempting to run at 4-4-4-15 be a bad idea, since the ram is only rated at that timing for 800FSB? Should I do 5-5-5-15 since I'm above 800? What about my TAS?
 
Try it. You never know. Try 4-4-4-15 at 825 (by the way, your FSB is definitely not at 825, you are likely multiplying by two) and run memtest86 for a few hours and Orthos blend overnight and see if you get any errrors. It's all trial and error, change something a little, trial and error again.
 
Originally posted by: Roguestar
Try it. You never know. Try 4-4-4-15 at 825 (by the way, your FSB is definitely not at 825, you are likely multiplying by two) and run memtest86 for a few hours and Orthos blend overnight and see if you get any errrors. It's all trial and error, change something a little, trial and error again.
Click to expand...

Typo, I meant 425. Thanks for the advice though.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top