RAID not recognized w/ 2.6c

[DerekHeimlich]

For some reason or another, any attempt to overclock my 2.6...even by 1mhz, results in my RAID array not being recognized by the Intel controller. Of course, that means I am not able to do much. I've never used RAID before so I guess my question is, is this normal? Is there anything I can do about it? Thanks.

 

[myocardia]

Derek, you didn't tell us your system specs. If you want to find out the "tricks" of OCing a particular motherboard, you'll have to at least tell us what board you're using...😉

 

[DerekHeimlich]

Good point...here they are:

Abit IC7-G
Intel 2.6c (stock cooling)
(Made by) ATI Radeon 9800 Pro 128mb
Soundblaster Audigy 2 Platinum
2x 120gb Western Digital SATA Hard Drives in RAID-0 Array (using Intel southbridge controller)

That should cover the relevant stuff. Thanks.

 

[FPSguy]

Try looking through this thread on ABit's forums. It sounds like your PCI/AGP frequency may not be locked.

 

[DerekHeimlich]

Bingo! Works great now...thanks a lot. Was totally perplexed there.

 

[FPSguy]

Cool. I am glad that helped.

 

[Jojo1971]

always make sure your agp/pci is locked otherwise your harddrives will have high potential to have data corruptions.