radeon 32 ddr

[topweb2000]

I got my card today (the radeon le) i did the reg edit,i short cout my powerstrip so it won't reset,..ok what speed is a good starting speed to o'c it I'm set at 190/190 is that ok? i installed a blue orb on it,i know i didn't need to but wanted too.and what beta drivers should i use?.i have windows ME
thanks
topweb2000

 

[ddiccico]

I ran up to 200 without any problems (for a short time though - didn't want to risk frying the card on the first day), I started to get some artifacts at about 205 (this is without a fan, just the heatsink that came with it).
I've been running it at 180 for almost a week, since I don't really want to run it faster without a fan, and I didn't see much of an improvement from 180 to 200 anyways.

 

[arod324]

topweb2000, how did you shortcut it. I've done all of the other tweaks, but haven't found out how to get powerstrip not to reset.
Thanks,
arod324

 

[ddiccico]

double click the powerstrip icon in the taskbar. in the powerstrip config panel that open, click on the options tab, and select auto-load at the bottom. it puts a key in HKLM/Run.
at least this works on my setup in win2k, i don't know how this works with 98/me

 

[Taz4158]

In 98 save this as a batch file:c:\windows\pstrip.exe /clk 190 /exit
Creat a shortcut to it and run it in your startup group.

 

[Silhouette90]

Hi guys,

I have a p-ii 350, hence my system bottleneck is the CPU most of the time, and when I run the fill-rate test in 3dmark2000, both with hyper-z and w/o hyper-z gives the same fill-rate results. Is there anyone who makes this test enabling/disabling hyper-z.

Thanks

 

[arod324]

When I had my AMD K6-2 300, and a Voodoo3 2k OC'ed to 166/166, EVERY resolution in Q3 would give me the same FPS from 640X480to 1024X768. I know that this is not the same benchmark, and my card did not have hyper-z, but I believe it is merely a case of your computer being heavily bottlenecked by your CPU.