• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Race to 2000 continues, updated for 11/02

S

SilverBack

Golden Member
Stats for 11/02

ElFenix.... 1705 11
TuffGuy.... 1562 15
Tetsuo (#1).. 1328 26
Phiton..... 1282 17
kb0ogt..... 1208 8
blade_47... 1111 12
Mucman..... 1105 5
SilverBack.. 1021 51
poopaskoopa. 958 38
Ben Davis... 952 20

More movement today.
Two position changes.
We all kick ass! 😀
 
I still think ElFenix is too far ahead to catch. Not that I'm not trying, and maybe, just maybe if I get this system up and running...
 
number of days to reach 2000: (based on the current weekly rate)

ElFenix..... 25.18
TuffGuy..... 37.85
Tetsuo...... 30.15
Phiton...... 41.53
kb0ogt...... 77.00
blade_47.... 103.7
Mucman...... 116.0
SilverBack.. 28.20
poopaskoopa. 29.89
Ben Davis... 51.66
 
I'm trying!! I'm trying!!! 😛
We all knew that Elfenix had a pretty hefty lead,
But I refuse to go down without a fight!!!! LOL 😀
 
c'mon athlon, c'mon athlon. i think if i can get this thing running i might have a shot at taking the gold. as it is, i'm looking at fourth...not good.

btw i just want everyone to know how cool silverback is. despite that fact that we are mortal enemies due to this race, he's actually troubleshooting my new system with me so we can get it up and running. granted, he keeps swinging me over to the most expensive correctional method, but i'm sure he means well... 😉 thank you silverback for your contributions to the team as well for your help with my system.
 
as if i didn't alreay suspect it... i'm in win98 and just to see, i started up seti, and within two seconds the system froze. that's after i ran 3dmark and sandra benchmarks. damn you seti! oh well, crucial ram is only $110! that's for pc133 cas2 ram for an a7v, so as soon as i get paid, i'm grabbing a stick, and then i'll be flying!
 
Good choice Tetsuo. Thats good stuff.
Your motherboard isn't revision 1.01 is it? If it is, that is the one that was problematic and should be returned, the 1.02 rev is much more stable.
Look by the last PCI slot it's silk screened on the motherboard which rev it is.
Well I added a P3 600 to the herd today, my Laptop... LOL 10 hour WU's. It's that damn speed step P3 that does it.
Hopefully my new LAN case will be up and running soon to.
I spend WAY to much money, I'm sure it's going to catch up with me soon 😉
 
wait, speed step actually slows down processing of fast mode? are you sure its not the really slow hard drive combined with conservative ram timings?
 
Silverback, it's rev. 1.02. you can actually tell a really simple way: if your motherboard came with the wire for the temp probe, it's 1.01, and if it's onboard, it's 1.02. speed step is something that extends battery life. if you are plugged into an ac outlet, the system runs at full speed and the screen is at full brightness, but when you run on battery, it steps the cpu down 50-100mhz and dims the screen. you can also disable all the power-saving features on your laptop, but it's going to get awfully hot that way...

i changed the memory settings to user define and set them at 3,3,3 @ 100. i'm about to start seti right now, so we'll see if that made a difference. i think i'm also going to clear the cmos and start all over to see if that makes a difference. keep your fingers crossed.
 
p3 600 does it in 10 hours on fast mode or is it 10 hours on power saving mode? 10 hours on power saving (500mhz) isn't really bad, still slow, but 600 should go better.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top