quick question

[scrawnypaleguy]

Will an antec neopower 480 fit in the psu bay of a standard lian li pc-v1000?

 

[suszterpatt]

If both are ATX then most probably, yes.

 

[JEDIYoda]

There are several steps to take in deducing the correct answer to your particular problem!!

You would first need to have some sort of measuring device that would fit inside your case to measure the aperture where the PSU is to go!

Then with that information properly recorded its on to step #2!!

Then you need to measure the PSU in order to deduce if its iether to large to fit or to small to fit inside the PSU enclosure in said case!

Good Luck!!

 

[Operandi]

Originally posted by: scrawnypaleguy
Will an antec neopower 480 fit in the psu bay of a standard lian li pc-v1000?

yes, it will.

 

[scrawnypaleguy]

Jediyoda, I was asking because I don't have that case, and I was considering upgrading.

Thanks Operandi. You wouldn't have any pics, would you?

 

[BonzaiDuck]

I'm sure it will. I have a friend who was faced with the dilemma of trying to get a 175mm - long OCZ PowerStream in his Lian Li 1x00 case -- no way -- not without cutting away part of a drive cage.

but the Neopower, and I just received the 480 to use in another machine -- is standard ATX size. It should definitely fit.

Also -- I had been concerned about the CFM (and fan speed) of the 120mm Antec fan inside the Neopower. somebody here stated that their Neopower fan never spun up above 1,400 rpm.

But that's because it is thermally controlled, and Antec's tech-support assured me the fan's top-end rating was more like 3,000 rpm.

 

[Mrvile]

It will.

 

[scrawnypaleguy]

Ok cool thanks guys. I was worried since the plugs for the modular cables stick out an inch or two.