Question on Asus A7N266-VM Jumper settings

[fwtong]

I was wondering how to set the jumpers on the Asus A7N266-VM for the CPU and memory bus.

CPU is a 1.3ghz Duron, jumper settings are either 100 or 133.
Memory is 256mb PC2100 DDR, jumper settings are either 100 or 133.

 

[mechBgon]

CPU should be 100, and you can use either 100 or 133 for the memory.

 

[DAPUNISHER]

Be aware that the jumper settings in the manual are backwards, at least mine in several other posters are. The board shipped with both BSEL0 and BSEL1 on jumpers 2-3 which the manual says is DRAM133 CPU100 but it's the exact opposite DRAM133 CPU133 so move both jumpers over 1 pin to 1-2 and you have DRAM133 CPU100.