Question about SLI ready PSUs....

[RollWave]

I'm buying a PSU for the ASRock board and right now I have an AGP AIW x800xt card I'll be using. I'm thinking of going with the Enermax Liberty and just wanted to make sure that it'll handle the AGP card I have.

 

[jpzc04]

Yes it will handle your agp card just fine.

 

[RollWave]

Would I use one of the PCIe connector cables or do those only have PCIe connectors at the end? (its a modular PSU)

 

[mb]

Edit: "ALL-IN-WONDER X800 XT requires connection to your PC?s internal power supply for operation. A 300-watt power supply or greater is recommended to ensure normal system operation. A 350-watt power supply may be required in some fully-loaded PC systems where a number of other internal devices are installed."

It won't use the same connector as PCIe, just molex... so yeah the new PSU will be fine.

 

[RollWave]

Well my X800XT needs a 4pin molex to get going

 

[RollWave]

Originally posted by: supafly
Edit: "ALL-IN-WONDER X800 XT requires connection to your PC?s internal power supply for operation. A 300-watt power supply or greater is recommended to ensure normal system operation. A 350-watt power supply may be required in some fully-loaded PC systems where a number of other internal devices are installed."

It won't use the same connector as PCIe, just molex... so yeah the new PSU will be fine.

Excellent. Thanks. Already ordered the Liberty after reading some good things at the PSU forum on HARDOCP.

 

[mordantmonkey]

let me know how you like it. I've been trying to decide between the seasonic 500W and the liberty 500W. Both have active PFC, but the liberty is $35 cheaper. Just jumped on the 2GBOCZ platinum in hot deals, so i've got a while to think this over.

 

[ShellGuy]

my 6800gt AGP card takes the same thing my 350 couldn't handle it so i had to upgrade.


Will G.