I have recently ended up with this ancient CDR drive, and don't have any software or documentation for it. It reports to windows as Matshita CD-R CW-7502. SCSI controller used is Adaptec AIC 7850 (cheap one, I got it bundled with my scanner). When attempting to burn a CD (using demo version of GEAR 5.0), I get the following error:
Write operation was not successful.
Illegal SCSI request reported by CD recorder.
SCSI driver error code = 02052400h
Updating the firmware from 4.10 to 4.17 didn't help.
I tried using NTI CD-Maker 2000, and in a test run, it gave no errors. However, when I tried to actually burn a CD, I ended up with an "Illegal request" message, and a coaster. Here is the session log file:
========== BEGIN OF LOG ==========
NTI CD-Maker 2000 Professional Version 4.0.24 (SKU-22440358888)
Start Time: Monday, September 18, 2000, 11:09:50AM
Source CD Information:
Total Blocks (Disc Size) = 216794
Session 1: CD-ROM
Track 1: Mode 1; LBA = 0; PreGap = 150; Length = 216794; Block Size = 2048
CD-Reader: CREATIVE CD3221E YC100 (H
Firmware Version: 1.00
Read Speed: Maximum = 32x, Current = 32x
CD-Recorder: MATSHITA CD-R CW-7502 (F
Firmware Version: 4.17
Write Method: Disc-At-Once
Close Disc: Yes
Leave Session Open: No
Copy CD: from image file
Disc Media: CD-R
Free Disc Blocks: 336375
Test: Yes
Write Speed: 4x
Copy CD: from image file
Disc Media: CD-R
Free Disc Blocks: 336375
Test: No
Write Speed: 4x
Error Code: 1005
CDB: 2A 00 FF FF FF 6A 00 00 20 00 00 00
SenseKey:05 ASC:2C ASCQ:00
Finish Time: Monday, September 18, 2000, 11:23:08AM
========== END OF LOG ==========
Does anyone have any idea what can I do to make this thing work?
Write operation was not successful.
Illegal SCSI request reported by CD recorder.
SCSI driver error code = 02052400h
Updating the firmware from 4.10 to 4.17 didn't help.
I tried using NTI CD-Maker 2000, and in a test run, it gave no errors. However, when I tried to actually burn a CD, I ended up with an "Illegal request" message, and a coaster. Here is the session log file:
========== BEGIN OF LOG ==========
NTI CD-Maker 2000 Professional Version 4.0.24 (SKU-22440358888)
Start Time: Monday, September 18, 2000, 11:09:50AM
Source CD Information:
Total Blocks (Disc Size) = 216794
Session 1: CD-ROM
Track 1: Mode 1; LBA = 0; PreGap = 150; Length = 216794; Block Size = 2048
CD-Reader: CREATIVE CD3221E YC100 (H
Firmware Version: 1.00
Read Speed: Maximum = 32x, Current = 32x
CD-Recorder: MATSHITA CD-R CW-7502 (F
Firmware Version: 4.17
Write Method: Disc-At-Once
Close Disc: Yes
Leave Session Open: No
Copy CD: from image file
Disc Media: CD-R
Free Disc Blocks: 336375
Test: Yes
Write Speed: 4x
Copy CD: from image file
Disc Media: CD-R
Free Disc Blocks: 336375
Test: No
Write Speed: 4x
Error Code: 1005
CDB: 2A 00 FF FF FF 6A 00 00 20 00 00 00
SenseKey:05 ASC:2C ASCQ:00
Finish Time: Monday, September 18, 2000, 11:23:08AM
========== END OF LOG ==========
Does anyone have any idea what can I do to make this thing work?
Facebook
Twitter