Hey Everyone ..
Ill start with some Basic system info:
My board is a Gigabyte GA-K8NS-939 - ( Click here for Link to the providers site
So the story is that i wanted to update my Bios since ive been using the first one Gigibyte Releashed with the Board when i bought it..
So after 30min looking on Gigabytes site i found @Bios , a program made by Gigabyte to savely update the Bios...
I used @Bios and all seems like it went as i should..
My pc wanted to rebot so i pressed "ok" and it did..
i noticed in the Prombt it said " DMI pool date update completede" something like that , so i thought "wow it worked" but i was soon with a Angry face on ..
The system start's good and runs all drives and so on until the Windows Loading Screen, The Windows loading screen completes 1bar of "loading" and then the screen goes black , and on my Screen ( Dell ) there is a indicator when the system is sending signal to the Screen this LED goes off..
After about 5-10 restart's im totaly clueless what to..
Ido one more attempt and i decide to run windows in "save mode with Network" And windows starts without any problems..
After some hours looking for a way to fix my bios:
1: i take out the Bat and the powersuply and wait 20min (+-) pop it all in again :
Error - Bios Using default setting -
i think great now its fixed but my Pc Stil dies at the Windows loading scren.
2: After reading abit i see i can reset the bios on the Board with a "jumper" i do that, and yes its a Reset of my bios , Almost - Again my pc die at Windows loading Screen..
3: I try to flash the Bios again with @Bios but the program cant load in Windows "Savemode" , Other program's i tried - Uniflash - Winflash and Flasher , Stil no luck in Windows "savemode"
4: At this point im lost so i grab the Windows Cd and hope there is a Repair Tools or something there , and Nothing.. For fun i try to reinstall Windows and i get thos Error
QL10WNT.sys is corrupted Press any key to continue - I press ok and my Pc rebots so im back to nothing...
So that's why im here, Got the site from a close friend and he said you guys are pro's in this stuff so i hope you can help me..
Thanks Very much for Reading - Christian
Ill start with some Basic system info:
My board is a Gigabyte GA-K8NS-939 - ( Click here for Link to the providers site
So the story is that i wanted to update my Bios since ive been using the first one Gigibyte Releashed with the Board when i bought it..
So after 30min looking on Gigabytes site i found @Bios , a program made by Gigabyte to savely update the Bios...
I used @Bios and all seems like it went as i should..
My pc wanted to rebot so i pressed "ok" and it did..
i noticed in the Prombt it said " DMI pool date update completede" something like that , so i thought "wow it worked" but i was soon with a Angry face on ..
The system start's good and runs all drives and so on until the Windows Loading Screen, The Windows loading screen completes 1bar of "loading" and then the screen goes black , and on my Screen ( Dell ) there is a indicator when the system is sending signal to the Screen this LED goes off..
After about 5-10 restart's im totaly clueless what to..
Ido one more attempt and i decide to run windows in "save mode with Network" And windows starts without any problems..
After some hours looking for a way to fix my bios:
1: i take out the Bat and the powersuply and wait 20min (+-) pop it all in again :
Error - Bios Using default setting -
i think great now its fixed but my Pc Stil dies at the Windows loading scren.
2: After reading abit i see i can reset the bios on the Board with a "jumper" i do that, and yes its a Reset of my bios , Almost - Again my pc die at Windows loading Screen..
3: I try to flash the Bios again with @Bios but the program cant load in Windows "Savemode" , Other program's i tried - Uniflash - Winflash and Flasher , Stil no luck in Windows "savemode"
4: At this point im lost so i grab the Windows Cd and hope there is a Repair Tools or something there , and Nothing.. For fun i try to reinstall Windows and i get thos Error
QL10WNT.sys is corrupted Press any key to continue - I press ok and my Pc rebots so im back to nothing...
So that's why im here, Got the site from a close friend and he said you guys are pro's in this stuff so i hope you can help me..
Thanks Very much for Reading - Christian
Facebook
Twitter