Anyone know what "safe" temp ranges are for a Q6600?
As I understand it, safe temps for an e6x00 are:
tcase = temp at the thermal spreader as read by speedfan <55 C
tjunction = temp at the core as read by TAT <70 C
Here are my temps after 4 orthos (cpu affinity set one per core) for 40-50 minutes:
9x266 = 2.4 GHz
Speedfan: 39-45C (coolest core and hottest)
TAT: 60 and 57.
----------------------
9x300 = 2.7 GHz = stable
Speedfan: 44-53 (coolest and hottest)
TAT: 68 and 65
----------------------
9x333 = 3.0 GHz = stable
Speedfan: 46-56 (coolest and hottest)
TAT: 71 and 67
Relevant system specs: Asus P5B Deluxe, Q6600+Ultra-120 Extreme+AS5, 2x1gig Ballistix DDR2-800 @ 4-4-4-12. Also, everything is stock except the FSB (speedstep is enabled, C1E is enabled, CPU and mem voltages are stock).
As I understand it, safe temps for an e6x00 are:
tcase = temp at the thermal spreader as read by speedfan <55 C
tjunction = temp at the core as read by TAT <70 C
Here are my temps after 4 orthos (cpu affinity set one per core) for 40-50 minutes:
9x266 = 2.4 GHz
Speedfan: 39-45C (coolest core and hottest)
TAT: 60 and 57.
----------------------
9x300 = 2.7 GHz = stable
Speedfan: 44-53 (coolest and hottest)
TAT: 68 and 65
----------------------
9x333 = 3.0 GHz = stable
Speedfan: 46-56 (coolest and hottest)
TAT: 71 and 67
Relevant system specs: Asus P5B Deluxe, Q6600+Ultra-120 Extreme+AS5, 2x1gig Ballistix DDR2-800 @ 4-4-4-12. Also, everything is stock except the FSB (speedstep is enabled, C1E is enabled, CPU and mem voltages are stock).