Problm with USB ABIT KT7-RAID

[Usul]

Hi!
I have a problem with my ABIT KT7 RAID and its USB controller.
After a certain amount of data is transferred, it just dies.
Happends with the Digital camera, with the joystick and woth the driving wheel.
I had the same problem on another identical motherboard, while everything was fine with a non raid one.

Any suggestion?Please help!!

Oh, newest BIOS.

 

[misle]

I had the exact same problems with my KT7A-RAID.

Check these out, they will most likely solve your problems.

Paul's Unofficial ABIT KT7 FAQ
USBMAN

Hope this helps

Matt

 

[Usul]

Done, but nothing.
Raising .1V IO helps for the joystick, not for the camera....

 

[FusionTorch]

Go to ViaTech Website and download the latest drivers. I have seen that this will fix this kind of issue.

 

[Usul]

I'm using 1.26 already 🙂

 

[IBuyUFO]

If you're not using the raid part turn it off from the bios. Other things you may want to disable are your secondary ide and/or primary ide if you're not using it. Also disable your com1 and com2 port along with the lpt1 port if not in use.
My system has com1, com2, lpt1, secondary ide turned off.

 

[Usul]

Dos it help?
I'll go disable the secondary IDE and the com port, I have a RAID array I'm using, at the next restart.