- Dec 17, 2007
- 74
- 0
- 66
I have been running windows with 2 monitors. one on the PCIe card, set as the primary monitor, and another on the motherboard's onboard video, as the #2 monitor. it hasn't given me any problems and I have been doing that for a long time.
now, the #2 monitor doesn't get a signal and worse yet, the onboard video adapter isn't seen by windows anywhere.
either is seen in BIOS. I can set either one to run first, and BIOS and Windows startup screen shows on the one set first, but
with the PCIe going first, I get the problem described above.
with the onboard video going first, windows DOES see both video adapters, and "primary display" goes to the onboard video. I don't want that because the PCIe card is much more powerful than the onboard video. I want the PCIe to be the "primary display".
I could leave it like that, with the onboard video loading first, and set the "primary display" to the PCIe card, but when the computer boots up it will always show BIOS and windows startup screen on the wrong monitor. (the onboard video's monitor, display #2)
it's not a case of "either-or" video adapter enabled, because I have been using both for a long time, I still get both when onboard video is set to load first, and there aren't any settings I could have accidentally hit to disable one or the other like there are on a laptop. the motherboard was designed to use both at the same time.
I can't use Add Hardware because it doesn't see anything added to the system (nothing has been) and when I tell it to add a hardware anyway, I point it to the onboard video drivers and it asks which model to install, but the window is blank.
I tried turning off, disconnecting and unplugging everything for 10 minutes but that doens't work.
to make it simple, I need to make windows to see the onboard video, even when the PCIe video is set to load first in BIOS. it should be doing this in the first place. it was doing that until yesterday.
now, the #2 monitor doesn't get a signal and worse yet, the onboard video adapter isn't seen by windows anywhere.
either is seen in BIOS. I can set either one to run first, and BIOS and Windows startup screen shows on the one set first, but
with the PCIe going first, I get the problem described above.
with the onboard video going first, windows DOES see both video adapters, and "primary display" goes to the onboard video. I don't want that because the PCIe card is much more powerful than the onboard video. I want the PCIe to be the "primary display".
I could leave it like that, with the onboard video loading first, and set the "primary display" to the PCIe card, but when the computer boots up it will always show BIOS and windows startup screen on the wrong monitor. (the onboard video's monitor, display #2)
it's not a case of "either-or" video adapter enabled, because I have been using both for a long time, I still get both when onboard video is set to load first, and there aren't any settings I could have accidentally hit to disable one or the other like there are on a laptop. the motherboard was designed to use both at the same time.
I can't use Add Hardware because it doesn't see anything added to the system (nothing has been) and when I tell it to add a hardware anyway, I point it to the onboard video drivers and it asks which model to install, but the window is blank.
I tried turning off, disconnecting and unplugging everything for 10 minutes but that doens't work.
to make it simple, I need to make windows to see the onboard video, even when the PCIe video is set to load first in BIOS. it should be doing this in the first place. it was doing that until yesterday.
Facebook
Twitter