Problems with my main PC, now won't boot. Please help!! *FIXED*

[Swanny]

Hello everyone. I posted here because I knew I'd get a good response.

Well, 10 minutes ago I did something to my main SETI PC (1800+ and Abit KR7A-RAID) and now it won't boot. I was just looking at what options I had in the BOIS (only had the mobo for 4 days) for the PCI dividers. When I was done, I hit save and exit. Usually the BIOS quits and boots right up again. It didn't this time, and after about a minute a got fed up and hit the reset button. It didn't do anything then, either. So I shut it down for a while and tried again. That didn't help. So it shut off the power supply and cleared the CMOS, and still no go. I did that again and nothing. So here I am with a computer that only runs its fans and drives.


Anyone know what I could do, or is the BIOS shot?

 

[lane42]

Hi swanny, Try unplugging from wall outlet for 10 or 15 min. and try again.

 

[Swanny]

Thanks,

15 min starting now.

 

[Swanny]

Cool, it's fixed now!

And only about 1/2 of a WUs lost.

Thanks lane42😀

 

[lane42]

Glad i could help swanny, I get lucky once in awhile 🙂

 

[Smoke]

Me tips my cap to gg. 😀

That the attitude my Faux Grandson, counting those 1/2 Work Units. 😀 😛