Problems with Liteon 24x and CloneCD

[Homerboy]

I recently purchased a liteon 24x CDRW and I seem to be haivng issues with it reading CloneCDs that I have burned.
It has n/p BURNING the CDs as they work fine in other CDROM drives and CDRW drives... just NOT in the liteon...
any suggestions anyone? I'm VERY disheartend at this point...

Tia

 

[TNTrulez]

Make sure the liteon is a slave drive, not a master. If that doesn't work, you can try this.

1) Power off the computer.
2) Get a jumper and connect the bottom left pins on the pins to the side of the drive.
3) Power on your system.
4) Delete your CD-drive from windows hardware
5) Power off
6) Remove jumper
7) Power on

See if that works.

 

[bocamojo]

You might try to flash the drive. LiteOn has some firmware that they released in late November that fixes a lot of these type of issues.

 

[Homerboy]

"2) Get a jumper and connect the bottom left pins on the pins to the side of the drive. "

Could you clarify that a bit?

I did do the latest firmware flas... I was hoping that was the fix, but it's still no go.