Problems with firmware upgrade on D-LINK DI-614+

[JonTheBaller]

When I upgrade the firmware from 2.10 to 2.18, the wireless connection breaks and reconnects every 5 minutes or less. When I went back to 2.10, I didn't have any problems. It's not a big deal, but I would like to know why 2.18 doesn't work for me.

http://support.dlink.com/Products/view.asp?productid=DI-614+

 

[pilgrim2u]

I saw this:

Why does my wireless connection drop after upgrading to 2.18 firmware on my DI-614+ router?

The 2.18 firmware for the DI-614+ adds the 4X mode option. When 4X is enabled, some settings on the DI-614+ are altered from their default values and can not be changed. The RTS Threshold and Fragmentation are both now 4095 instead of 2432, 2346 and the Preamble is set to Short instead of Long.

If you are not using a complete D-Link Airplus Wireless network with the 4X mode option, you must disable 4X mode on the DI-614+.

 

[JonTheBaller]

Originally posted by: pilgrim2u
I saw this:

Why does my wireless connection drop after upgrading to 2.18 firmware on my DI-614+ router?

The 2.18 firmware for the DI-614+ adds the 4X mode option. When 4X is enabled, some settings on the DI-614+ are altered from their default values and can not be changed. The RTS Threshold and Fragmentation are both now 4095 instead of 2432, 2346 and the Preamble is set to Short instead of Long.

If you are not using a complete D-Link Airplus Wireless network with the 4X mode option, you must disable 4X mode on the DI-614+.

thanks.