• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Problems setting up Soyo Dragon+ Raid...

M

mjquilly

Golden Member
I'm having troubles setting up an array on my Dragon+ Board. All I have installed on the board, other than CPU and memory, is my Radeon AIW, HDD's set to Master on IDE 3 and 4, and my DVD and CDRW on IDE2. After POSTing, and getting through the BIOS screens, the RAID setup utility starts and shows "Scanning IDE Drives......." This shows for awhile, then I get this message:



"Warning: FastTrak does not detect proper interrupts, Please check your PCI IRQ setup, and make sure the PCI slot support Bus Master Operations"



What do I need to change?
 
Try setting your raid HD's to the CS (cable select) jumpers on the back. Then hit ctrl+F when it prompts you to get into the fast build bios. PM me if you still have problems, and I'll check all the settings on mine. Also, make sure you have RAID enabled in the main bios!
 
I figured this problem out, the problem was that I had my HD's set to "Master", and they needed to be set to "Single". I have another problem now, which I posted here
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top